NEW ERA
PUMP SYSTEMS (tm)
NE-1000 Programmable Syringe Pump

TTL Logic Control Interface:

Designed for the real-world. Control inputs are software filtered to prevent false signals due to ringing and glitches. This is especially important when mechanical relays, such as foot switches are used.

Control the pump from a foot switch or timer.

Output signals can be used to switch a valve from an output to an input reservoir.

Pumping direction control

Programmable output signal

Programmable responses to input signals

Configurable start and stop trigger:

Start or stop the pump on each contact closure to ground. For example, a foot switch.

Start the pump on closure to ground and stop the pump on opening the connection. For example a timer relay that starts the pump whenever closed and stops the pump whenever open.

Only start the pump on each contact closure to ground. For example, a laboratory animal trained to press a lever can receive a drug dosage from the pump and the pump will not stop or deliver another dosage until it is permitted by the pumping program entered by the user

Configurable trigger input:

• Edge trigger: Starts or stops the pump, such as from a foot switch
• Level trigger: Start or stops the pump, such as from a timer or relay control
• Start only trigger: Edge trigger will only start the pump, such as from a lab animal trained to press a lever to receive a dosage.