1998 INTERCLUB DINGHY MEASUREMENT SHEET

Date 
Boat 
Signature of Official Fleet Measurer 
MIN MAX ACTUAL
HULL SPECIFICATIONS
Weight - Fully Rigged, no sails or loose gear 250lbs   
Bottom of Transom (T2) to aft end of centerboard slot 33" 34.25"  
Centerboard slot width 7/8"   
Centerboard slot length 44" 48"  
Centerboard pin hole location from T2 75" 77"  
Top Transom (T1) to aft end of mast partner hole 8'10" 9'0"  
Length of Partner hole  4"  
Chainplates location from aft edge of mast partner 1.5"   
Bow tip weight 115 lb   
Traveler location inboard  6"  
Rub rails (required on all boats)   Y or N
Floorboards (required in wood boats)   Y or N
CENTERBOARD
Centerboard thickness  7/8"  
RUDDER
Rudder thickness  7/8"  
Distance from rudder to transom (top)  1.75"  
Distance from Rudder to Transom (bottom)  1.75"  
Variance from top to bottom  0.5"  
Rudder depth 27" 29"  
MASTS
Halyard sheave to top of black band  16'0"  
Halyard sheave to shroud 53" 60"  
Halyard sheave to forestay 34" 39"  
Top of mast band to partners  21"  
Halyard lock to center halyard sheave 4"   
BOOM
Band location (from aft edge of mast)  8'8"  
SAIL
Head girth  4.125"  
Leech length  17'5"  
Midgirth  5'4.5"  
Foot roach  16'10"  
Batten length  19"  
batten pocket width  2"  
Roach restrictions (after ends of batten pockets)  2"  
Measured and stamped by your local fleet measurer   Y or N
CREW
Crew Weight - Dressed 315 lbs