|
TAIG LATHE OPTIONS |
||||
|
PRESENTED BY SMALLER THAN LIFE |
||||
|
79 SEBBINS POND DRIVE, BEDFORD NH 03110 |
||||
|
603-669-4185 smallife@verizon.net |
||||
|
Prices Effective 1/12/07 |
||||
|
Basic Metal Lathe Package |
||||
|
Lathe with tool post & carriage stop (Pulleys and tailstock not included) 15" bed. |
$184.75 |
|||
|
Marathon Motor 115v 60 HZ 1725 RPM 1/4 HP, 1/2" shaft prewired & switch |
$98.50 |
|||
|
Pulley set for 1/2" shaft motor, belt included |
$24.45 |
|||
|
Mounting board 12" x 18" |
$7.50 |
|||
|
6 piece HS tool bit set, left,right,45 degree,round nose,boring bar, and cut off |
$27.60 |
|||
|
Tailstock, lever operated 5/8" off set with dead center, 3/8-24 thd for drill chucks |
$38.20 |
|||
|
0-1/4" Jacobs drill chuck, industrial quality 3/8-24 thread. |
$36.25 |
|||
|
Wood tool rest assembly |
$26.75 |
|||
|
1 1/2" Tool Rest (gravers) |
$15.00 |
|||
|
Spare belt |
$7.90 |
|||
|
1" Spindle wrench |
$7.50 |
|||
|
Sherline self centering 4 jaw chuck, with bushing for Taig |
$130.00 |
|||
|
Sherline 5pc collet set |
$90.00 |
|||
|
Arbor & drawbar custom modification |
$25.00 |
|||
|
Mounting and set up |
$50.00 |
|||
|
Set of 7 Gravers |
$84.00 |
|||
|
Book - The Taig Lathe - by Tony Jeffree |
$22.95 |
|||
|
Freight from Taig |
$30.00 |
|||
|
Total |
$906.35 |
|||
|
Freight from Smaller Than Life is additional |
||||
|
Metal Package Extras |
||||
|
Sherline 17 pc Collet set, if ordered separately |
$275.00 |
|||
|
Sherline 17 pc collet set, if ordered with basic lathe pkg, replaces 5 pc collet set |
$185.00 |
|||
|
Top slide (compound) for cutting tapers and angles |
$44.10 |
|||
|
Milling attachment mounts on crosslide (2 x 3 3/4" table) |
$61.70 |
|||
|
Milling vice, 2.125" opening x 2" wide |
$26.75 |
|||
|
Total if ordered with lathe package |
$317.55 |
|||
|
Basic Wood Lathe Package |
||||
|
Lathe with tool post & carriage stop (Pulleys and tailstock not included) 15" bed. |
$184.75 |
|||
|
Marathon Motor 115v 60 HZ 1725 RPM 1/4 HP, 1/2" shaft prewired & switch |
$98.50 |
|||
|
Pulley set for 1/2" shaft motor, belt included |
$24.45 |
|||
|
Mounting board 12" x 18" |
$7.50 |
|||
|
Tailstock, lever operated 5/8" off set with dead center, 3/8-24 thd for drill chucks |
$38.20 |
|||
|
0-1/4" Jacobs drill chuck, industrial quality 3/8-24 thread. |
$36.25 |
|||
|
Wood tool rest assembly |
$26.75 |
|||
|
Set of 7 Gravers |
$84.00 |
|||
|
90 degree tool rest (for bowl turning) |
$15.00 |
|||
|
Spare belt |
$7.90 |
|||
|
1" Spindle wrench |
$7.50 |
|||
|
Sherline self centering 4 jaw chuck, with bushing for Taig |
$130.00 |
|||
|
Needle bearing center, spring loaded (fits in tailstock) |
$15.80 |
|||
|
Cup center |
$10.00 |
|||
|
Face plate, 3 holes, 2" dia. (wood turners) |
$10.15 |
|||
|
Wood turning Tools (Set of 4)) |
$40.00 |
|||
|
Mounting and set up |
$50.00 |
|||
|
Freight from Taig |
$30.00 |
|||
|
Total |
$816.75 |
|||
|
Duplicator for Wood Lathe |
||||
|
Duplicator |
$125.00 |
|||
|
Adjustable follower |
$25.00 |
|||
|
Leg template kit |
$20.00 |
|||
|
1/2” stop collar |
$9.00 |
|||
|
Freight from manufacturer |
$15.00 |
|||
|
Total |
$194.00 |
|||
|
Freight from Smaller Than Life is additional |
||||
|
Complete Package (Not including metal extras) |
||||
|
Lathe with tool post & carriage stop (Pulleys and tailstock not included) 15" bed. |
$184.75 |
|||
|
Marathon Motor 115v 60 HZ 1725 RPM 1/4 HP, 1/2" shaft prewired & switch |
$98.50 |
|||
|
Pulley set for 1/2" shaft motor, belt included |
$24.45 |
|||
|
Mounting board 12" x 18" |
$7.50 |
|||
|
Arbor & drawbar custom modification |
$25.00 |
|||
|
Mounting and set up |
$50.00 |
|||
|
6 piece HS tool bit set, left,right,45 degree,round nose,boring bar, and cut off |
$27.60 |
|||
|
Tailstock, lever operated 5/8" off set with dead center, 3/8-24 thd for drill chucks |
$38.20 |
|||
|
0-1/4" Jacobs drill chuck, industrial quality 3/8-24 thread. |
$36.25 |
|||
|
Wood tool rest assembly |
$26.75 |
|||
|
90 degree tool rest (for bowl turning) |
$15.00 |
|||
|
1 1/2" tool rest (gravers) |
$15.00 |
|||
|
Graver set of 7 |
$84.00 |
|||
|
Needle bearing center, spring loaded (fits in tailstock) |
$15.80 |
|||
|
Cup center |
$10.00 |
|||
|
Face plate, 3 holes, 2" dia. (wood turners) |
$10.15 |
|||
|
Set of 4 turning tools |
$40.00 |
|||
|
Spare belt |
$7.90 |
|||
|
1" Spindle wrench |
$7.50 |
|||
|
Sherline self centering 4 jaw chuck, with bushing for Taig |
$130.00 |
|||
|
Sherline 5pc collet set |
$90.00 |
|||
|
Duplicator |
$125.00 |
|||
|
Adjustable follower |
$25.00 |
|||
|
Leg template kit |
$20.00 |
|||
|
1/2” stop collar |
$9.00 |
|||
|
Book - The Taig Lathe - by Tony Jeffree |
$22.95 |
|||
|
Freight from manufacturer of duplicator |
$15.00 |
|||
|
Freight from Taig |
$30.00 |
|||
|
Total |
$1,191.30 |
|||
|
Complete set-up including metal extras |
$1,508.85 |
|||
|
Freight from Smaller Than Life is additional |
||||