The highest quality and most accurate miniature table saw available

- Machined aluminum table, 2 1/4" blade, continuous duty motor

- Blade height with positive lock and micro adjustment

- Table can be extended with 6" x 12" sliding table

- Miter arm with accurate stop system available

- Jigs for finger joints, tapers, picture frames & bevels

* Accuracy

The Preac Micro-precision Table Saw makes cuts to achieve tolerance within a few thousandths of an inch. Makes multiple cuts so accurately that intricate inlaid patterns can easily be reproduced in 1/12 scale. Minimal vibration and quiet operation contribute to producing the highest quality work possible. ______

* Quality

Precision ground ball bearing spindle, non-tilting arbor for rigidity, 1/8hp AC motor and all metal construction insures long life.

There are accessories required to enhance the versatility of the saw and allow you to make cuts used in dollhouse miniatures:

BLADE ELEVATING SCREW ---FOR FINE ADJUSTMENT OF BLADE HEIGHT

AUXILIARY TILTING TABLE ---CUT BEVELS WITHOUT THE INACCURACYS OF A TILTING ARBOR

.............

TAPER ATTACHMENT--- CUT TAPER LEGS AND SIMILAR PARTS

ADJUSTABLE MITER ARM STOP SYSTEM---CUT ACCURATE PARTS THE SAME SIZE

WOODEN MITER ARM-- PROVIDE SUPPORT FOR TINY PIECES BEHIND THE BLADE

SLIDING TABLE FOR MITERS_CUT PICTURE FRAMES AND MITERS FAST AND ACCURATE

.064 THICK BLADE-- MAKE GROVES (DADOS) TO FIT 1/16" LUMBER

.020 THICK BLADE (FOR FINE WORK)-- FOR FRAMES, INLAY AND VENEER

FINGER JOINT FIXTURE -- TO MAKE 1/16" INTERLOCKING FINGER (BOX) JOINTS

SLIDING TABLE WITH STOP --EXTEND USEFUL SIZE OF TABLE TO 6" X 12" FOR PANELS

7/16" NUT DRIVER -- USED TO CHANGE BLADES QUICKLY

Unparalleled Reputation--Ask any miniaturist who owns one--There is no other miniature table saw on the market that is as accurate and convenient to use. The low noise and small size make the Preac perfect in tight quarters. 

Specifications

• Two Table Sizes available .......4 x 6" and 6 x 10"
• Precision Ground Aluminum Construction
• Ball Bearing Spindle
• 1/8 hp 115v AC Motor
• Rip Fence included
• Adjustable angle and "T" Guide
• Easy Blade Height Adjustment
• Non-Tilting arbor for rigidity
• Mounted on MDF Base
• Adjustable angle "T" Guide
• 2 1/4" diameter HS Blade, .028 thick included
• 2 1/4" diameter HS Blade, .020 for frames and moldings and .064 thick for 1/16" dados and rabbets are recommended options.
• 2" diameter HS .020 blade optional for veneer and inlay

Still not sure? Possibly one of our workshops could help you decide if there should be a table saw in your future.

• TOOLS: PREAC_ORDER: SHOW & WORKSHOP SCHEDULE: HOME