-- COMMONLY AVAILABLE PARTS FOR THE ELEC-TRAK --

Many parts on the Elec-Traks are standard industry parts. 
Below is a start at listing those parts. Please see the notes
and disclaimers at the end! 


-- BEARINGS --

The bearings are standard metric sizes, so they are available from
many sources such as McMaster-Carr and can be bought in higher grades,
different materials (SS or ceramic!), or other with other features 
(permanently lubed, etc). The BASE NUMBER ONLY is shown. You probably
want the double sealed (not shielded), but that's up to you - add 2RS 
to the part number for sealed bearings. 
Thanks to Steve Naugler for this info (MSG #3163).

Traction Motor (large frame)
   Small end - 6203
   Large end - 6205

Mower Motor (small diameter)
   Small end - 6201   (original? in mine was a Hoover 201 - NLA)
   Large end - 6204   (original? in mine was a Hoover 99204 - NLA)

Mower Motor (large diameter)
   Same as traction motor
  (thanks to RJ Kanary, MSG#3164)


-- BRUSHES --
 
Advice from Steve Naugler was to buy from Technical Services.

Steve also states in MSG#945 the following for determining brush life:

New brush length = 9/16"
Worn out length = 3/8"


-- KEY --

A blank with the following label works (from Darryl McMahon in MSG#1401):

MADE IN U.S.A.
01122AR Y14
ILCO

I made a key with a generic Y14 blank and it seems to work .


-- HUBBELL  CONNECTORS --

Outlet: HBL7210B         (from Chris Zach Msg#3278)
Insulated Grip: HBL7102C

-----------------------------------------------------

Notes and Disclaimers:

1. The official source for parts is Bill Gunn at Technical Services. 
   I list these alternates to help with quick fixes and as a path 
   to finding interchangeable parts that may offer better performance.
2. On behalf of those that have listed information and myself,
   don't depend only on our suggestions. You should use your own 
   judgement or someone with technical ability to determine what 
   parts are suitable for your application.
3. I don't have any ties to any companies listed above.
4. PLEASE let me know of errors, omissions, or other parts to list. 

Steve Sawtelle
E12S