Dear Colleagues, 27 November 1993. As the next (Fourth) Cold Fusion conference is about to begin it is perhaps useful to give new readers an account of what happened at the last one - and it may be a useful base for others. All the papers were favourable to Cold Fusion except those by Fukai (section 2.8) and myself (sect. 4.9). Douglas R. O. Morrison. Dear Colleagues, 1 November - 6 December1992. COLD FUSION UPDATE No. 7. THE THIRD INTERNATIONAL COLD FUSION CONFERENCE. Held in Nagoya, 21 to 25 October 1992. It started with a NTT Press Conference but ended with a Whimper. Cold Fusion is now claimed with NORMAL hydrogen. Fewer published results but more funding. Skeptics of Cold Fusion verbally attacked. Original experiments of Fleischmmann and Pons and Jones criticised. Fourth Annual Conference scheduled for Hawaii - scientific meeting? OTHER NEWS - Lawyer Triggs writes to Frank Close. SUMMARY The character of the annual Cold Fusion conference is changing. In the Invited talks, only a few new results were presented which claimed excess heat and nuclear products while many other claims were relegated to poster sessions. These other claims included several groups saying that they observed excess heat with normal water, ie light hydrogen - this is in contradiction with Fleischmann and Pons and others who said it happens only with heavy hydrogen (deuterium) and the proof that it is nuclear fusion is that it is NOT observed with light hydrogen. There were a number of highly unusual papers available but not all presented, claiming Cold Fusion in biology, in tiny black holes, in gravity decays and a Purdue group claimed it would help the Solar Neutrino Problem; also transmutation was claimed. On the other hand the most complete experiment in Japan according to the book of Abstracts, has been carried out over three years by Isagawa et al. at the National Laboratory for High Energy Physics, KEK - it was not chosen for presentation and was not mentioned - their evidence on excess heat, neutrons and tritium was against Cold Fusion although they found many artifacts which at first had appeared as real effects. Near the start of the conference, Nippon Telephone and Telegraph, NTT, held a press conference where Drs. E. Yamaguchi and T. Nishioka announced that they had for the the first time succeeded in detecting excess heat and helium during the experiment with high reproducibility. According to the three-page article in Liberation of 27 October, this caused the NTT share price to rise by over 11% (note NTT has the biggest share capitalisation in Japan and at times in the World - the rise was worth some eight billion dollars). The NTT share price fell quickly on subsequent days. Also it was said that the helium was observed with deuterium and not with light hydrogen. However at the Conference Round Table, Dr. Yamaguchi said that they had also observed excess heat with light hydrogen. With other contradictions, it is probably wiser to consider the press conference as premature since adequate checks have not yet been made and the evidence for excess heat is uncertain (see below). However NTT have offered to sell a Yamaguchi-style kit for $565 000 and they forsee a Nobel prize for Dr. Yamaguchi(see Notes). S. Jones and H. Menlove have tried to detect neutrons in the large (3000 ton) Kamiokande detector; with palladium and titanium, upper limits corresponding to 10 E -14 Watts were found. Previously they had claimed to have observed two types of bursts, some lasting for a few hours and the others lasting only about a hundred microseconds. However such effects were not observed in Kamiokande and with the much lower background, all the previous claims were disproved. They then tried cement in Kamiokande and not unnaturally in view of the high radioactivity of cement, observed counts. The fact that Cold Fusion is observed in some parts of the World but not in others - called in an earlier Email "the Regionalization of Results" - continues with Dr. F. Scarramuzzi saying that "Behind the Alps, Cold Fusion never existed". An expert on hydrogen in metals, Dr. F. Fukai, explained that Cold Fusion at the rates quoted, was impossible. D.R.O. Morrison reviewed all the published papers (over 700) and noted that the numbers of papers published had declined steeply and that only 8 experimental ones have been published so far in 1992 and of these 6 found no effect, one was positive and one undecided; he concluded "It has been said that if Cold Fusion has a 1% chance of working, we should continue. But the best estimate is not 1%. If one accepts the Kamiokande limit of 10 E-4 neutrons/second which is 10 E-16 Watts, then it is not 1% but (10 E-14)% or one hundred million millionth of a percent". Both Fukai and Morrison were verbally attacked by Cold Fusion Believers. The meeting finished with a round table discussion where the speakers mainly said that better experiments should be done, and then people drifted off without any great show of enthusiasm. One fact that was not clearly stated at the conference, is that the vast majority of the World's scientists do not believe that Cold Fusion could give useful energy and most do not believe in Cold Fusion. However this fact does seem to have been recognised as when one delegate said "Who has not been ridiculed by his colleagues?", there was a sympathetic agreement and no one objected. A major question is: "Can the Annual Cold Fusion Conferences be considered as scientific meetings"? Mr. Triggs, the lawyer of Stan Pons, has written a curious letter to Frank Close about the facts of the curious way that the F&P peak at 2.5 MeV moved to 2.2 MeV and the scale moved from 100 to 200 keV bins SUBJECTS 1. Before and Organisation 2. Thursday 22 October; McKubre, Claytor, Kunimatso, Srinivasan, Oyama, Enyo, Thompson, Fukai, Sanchez, Chien. 3. Friday 23 October; Takahashi, Mallove, Celani, De Ninno, Pons, Smedley 4. Saturday 24 October; Jones, Yamaguchi, Miles, Iida, Kasagi, Cecil, Tsarev, Gozzi, Morrison 5. After Morrison's Invited talk 6. Sunday 25 October; Claytor, Bockris, Li (China), Tsarev(Russia), Scaramuzzi(Italy) 7. Round Table, End of Conference 8. Next Cold Fusion conference - scientific meeting? 9. Conclusions. NOTES OTHER NEWS 1. BEFORE AND ORGANISATION The conference was supported by 8 major Japanese Societies - one was the Japanese Physical Society which I know well and which I respect, so expected a normal scientific meeting with a balance of speakers chosen to present different points of view and expected free and open discussion. Though not emphasised, there was clearly some appreciable Japanese industrial support for Cold Fusion. There were some 320 participants which was substantially more than the first two meetings which had about 200 each. Of these 199 came from Japan and about a third were from industrial organisations such as Mitsubushi, Toyota, Fuji Electrical, Sumitomo Electric, Tokyo Gas, Hitachi, Tokyo Electrical Power Co., Osaka Gas, NTT, Honda, Nomura, Nippon Steel, Kansai Electrical Power Co., Sanyo Electric, Aisin Saiki Co., NKK Co., Central Research Institute of the Electric Power Industry, also the Japanese offices of two French companies (Air Liquide and Cogema), plus the Director and Deputy Director of the Electrical Power Division of MITI - note that most were observers and not reporting results. This was quite an achievement for Dr. Hideo Ikegami, the Chairman of the Conference. There were 55 listed from the USA, 20 from Italy, 16 from Russia and the Ukraine, 11 from China and only 19 from the rest of the World, (which includes Stan Pons listed as from IMRA in France and Martin Fleischmann listed from the University of Southampton and the only person from the UK) so that it can be seen that World coverage was non-uniform. There were only 23 talks - all of 20 minutes except Stan Pons who had 30 minutes. There were reviews of Cold Fusion in China, Russia and Italy. Also there were two panel discussions and the meeting ended with a round table discussion. From the abstracts it seemed that I was the only skeptic speaking. 75 papers were scheduled for the poster session - again mine seemed the only paper presenting a skeptical viewpoint even though most of the World's scientists think Cold Fusion is dead. The poster sessions in the afternoons were of an unusual format - it was a very large room with many tables and the "posters" were generally A4 pages which covered the table. Thus the morning speakers could cover the table with their transparencies. This system worked very well and allowed everyone a satisfactory chance of seeing the papers and of discussing with the authors and with other participants. An afternoon was devoted to visiting the Toyota car plant - this was very interesting as while there was some robotization, what we saw was the production chain with many men doing various operations - they worked steadily but did not seem to be forced to go at too high a speed. At the end of the production line, the cars were driven a few metres and tested immediately. (We have had Toyota cars in the family for 19 years and they never break down so are thinking of buying another one next year - what I saw of the production chain reinforced this opinion). At the spectacular conference dinner, the representative from MITI said that they would fund research in Cold Fusion in the near future (was told they would give about $2.5 million next year and industry would give a comparable amount) This was not to be taken that they believed in Cold fusion (they call it Hydrogen Energy research) but that they thought it was worth further study. A message was read from Minoru Toyoda who is a major figure in the Toyota car company. He founded Technova in 1978 and IMRA in 1985. After Technova received a joint research proposal from Professors Fleischmann and Pons, he judged that they should work for IMRA Europe at the Science park near Nice. IMRA Japan is now also working on Cold Fusion research. Mr Toyoda is like many of us, greatly concerned by the World Energy problems and desires a harmonious development of Science and Technology as proposed by President Mitterand at the 1982 summit. His message is a very sincere one. (A review paper "World Energy in the Next Century" which is based on my Invited Talk at the November 1991 World Clean Energy Conference and presented at the 1992 Pugwash meeting, was submitted to this conference but not listed nor displayed). 2. THURSDAY 22 OCTOBER. McKUBRE, CLAYTOR, KUNIMATSU, SRINIVASAN, OYAMA, ENYO, THOMPSON, FUKAI, SANCHEZ, CHIEN. Missed the Welcome Party on Wednesday 21 October as was at the excellent Neutrino Astrophysics conference at Takayama and Kamioka. We also visited the famous KAMIOKANDE experiment which detected neutrinos from Supernova 1987A and is measuring neutrinos from the Sun now. It has 3000 tons of highly purified water and almost a thousand large photomultipliers in the walls which measure Cherenkov radiation. Steve Jones and Howard Menlove have been trying to repeat their Cold Fusion experiments in Kamiokande for over a year. Kamiokande is one of the best detectors in the World with a strong well-funded team led by Yoji Totsuka. On arriving was told by several people that excess heat was now being observed in light hydrogen by several (five) groups - truely startling news as previously the evidence that Cold Fusion was fusion of deuterium, was that the excess heat effect was observed with deuterium but NOT with hydrogen! These new claims change everything. In addition was taken aside and told that transmutations were being observed! The alchemists dream come true. By an unfortunate coincidence, none of the people telling me of these results had been invited to speak though they could present their sensational results at the poster sessions. Also they were not in contact with the press as the press conferences were only for Invited Speakers. 2.1 The first talk was Mike McKUBRE of SRI who, as usual, gave an excellent talk. He said over 200 experiments had been done on the loading of deuterium into palladium. He showed a graph of the loading, (D/Pd = x) with a peak near 0.8 to 0.85 and a very broad shoulder going down to zero and a steeply falling slope down to almost 1.1. He claimed that just below x = 0.93, four experiments gave excess heat and two did not while above 0.93 all gave excess heat. He uses closed cells. One of the fair aspects of his talk is that he presented his excess heat results in terms of the three different ways of expressing them; Peak excess heat observed for a short period of time = 350% Average excess heat during bursts = 2 to 50% Overall excess heat from start of run = 1 to 2 to 3 to 4%. In proposing a system which would be useful for power production, it is the last figure of 1 to 4% which is the relevent one for power companies. It would be good if all groups would follow Mike's example and give their claims in three ways - maximum effect, average during bursts, and average since start of run. This comment applies to excess heat and to nuclear products. 2.2 Tom CLAYTOR of Los Alamos gave a serious talk on the work of Ed Storms who could not attend. He said they have claimed an excess heat of about 20%, but when asked privately, did not know if Storms had calculated the overall total excess heat from the start of the run. The highest loading Storms had been able to achieve was x = 0.82 but when he took out the used palladium rods and scraped off the crud, the maximum loading was only 0.68 - troubling if one wishes to use the palladium repeatedly over long periods in a power plant. 2.3 Next was Dr. KUNIMATSU of IMRA Japan Co. Ltd - this appears to be a research foundation set up by Mr. Toyoda who is closely associated with the Toyota car company. They have spent rather generously for the last two years on Cold Fusion research. They find a maximum loading of x = 0.88. Excess heat of up to 35% was observed. 2.4 Dr. M. SRINIVASAN of BARC, Bombay, gave a remarkable talk. He said that the hottest topic was the Mills and Kneizys result that excess heat was observed with H2O (light hydrogen) when K2CO3 salts were used with a nickel cathode and platinium anode. This, he said, was explained by Mills with a "crazy theory with compact hydrogen atoms." He said he did not believe it but tried and found that 17 out of 18 cells gave excess heat and many gave tritium. Also with other alkali salts, Li2CO3 and Na2CO3, excess heat was obtained. Three groups at BARC obtained these results. (Note - the abstract does not contain all these results and says checks are being done). 2.5 Dr. N. OYAMA reported on experiments on excess heat in closed cells (they abandoned open cells because "the evaluation of excess heat is complicated"). They observed excess heat of 2.42% or 0.57W/cm3. This was only in one cell out of five (does this mean the total excess heat was 2.42/5 = 0.484% ?). No excess heat was observed with hydrogen. 2.6 Dr. M. ENYO gave a technical talk where he tried to compare loading obtained by electrolysis with that obtained by gas pressure - his highest value was H/Pd = 0.9 (note this is H and not D - usually D/Pd is 5 to 10% lower than H/Pd) by electrolysis which corresponded to 10 000 atmospheres. He said "the equivalent hydrogen pressure should not generally be related to the hydrogen overpotential by a simple Nernst-type equation" - this is in contradiction to Fleischmann and Pons who claimed an enormous equivalent pressure of 10 E26 atmospheres. 2.7 Dr. D.T. THOMPSON of Johnson Mathey gave a technical talk whose relevance was unclear - what people really wanted to know was how much helium was there in the Fleischmann and Pons Palladium rods after their claims in 1989? 2.8 Dr. Y. FUKAI talk was entitled "The ABC's of the hydrogen-metal system" and the abstract was rather calm. However the talk was shattering to Cold Fusion Believers. He noted that in D2 gas the separation of the atoms is 0.74 A and one needs a distance of 0.15 A to obtain 10 E-20 fusions per second. He explained why normally no two atoms can be closer than 2.1 A in a Palladium lattice. He also explained why it is difficult to load beyond 0.83. With vacancies in the lattice, it is possible to have up to 6 deuterium nuclei together but as Besenbacher showed, the separation is always greater than 1.85 A as some of the palladium nuclei are displaced by 0.3 A. Further he pointed out that undulations in the potential can reach about 1 eV but this is small compared with the 52 eV potential so that again the fusion rate will not be enhanced usefully. He showed that the use of a screened Coulomb potential was erroneous. It was suggested that before starting any new Cold Fusion experiment, one should read Dr. Fukai's book due out next January. Prof. Preparata of Milan said forcibly that something is missing - could you tell me why metals exist? You could not answer; and if you would answer I would shoot it down. People find heat. You think we are idiots but people find things. I tried to find Dr. Fukai later in the meeting but was unsuccessful. 2.9 Carlos SANCHEZ from Madrid talked of deuterium concentration in titanium. He concluded that there was a limit to the loading of titanium at room temperature of 1.65 to 1.70. 2.10 Dr. CHIEN of ROC(Taiwan) presented remarkable results claiming the power out was 8 times the input power with values up to 100 times. He is now at Texas A&M where he now again finds remarkably large amounts of tritium. 3. FRIDAY 24 OCTOBER. TAKAHASHI, CELANI, MALLOVE, DE NINNO, OKAMOTO, PONS, SMEDLEY. THEORY PANEL. 3.1 PANEL of Drs Takahashi, Okamoto, Mallove, Celani and de Ninno. The main subject was the results of TAKAHASHI et al. who have claimed 200 W/cm3 excess heat using a new technique of rapidly varying the input power with a 12-hour period. However they are now unable to repeat their earlier high values. A very unusual result was that the weak neutron emission (one neutron/sec) was decreased when the excess heat level increased - contrary to all previous results. However Dr. Takahashi can explain it in terms of his model where fusion can occur between two, three and four deuterons - the potential barrier apparently being not important - many physicists find this a very remarkable theory. He also found particles of 3 to 5 MeV which is higher than usual theories give. 3.2 Dr. F. CELANI reported on attempts to repeat the Takahashi experiment - the results which are still preliminary, gave excess heat but of appreciably lower levels, about 10%. 3.3 Dr. Eugene MALLOVE reported on his and other experiments using the dynamic Takahashi technique( he is a journalist specialising in science who wrote the pro-cold fusion book "Fire from Ice"). He and Mr. Rothwell built their equipment for less than $10 000, found ambiguous effects during the first 60 days. In their second run with new palladium, they found heat balance to 5%, ie no excess heat. He said that Tom DROEGE has provided a wonderful thermo- electric device which is very accurate and which Mallove incorporated in the calorimeter in addition to ordinary thermocouples (DROM comment - Tom is a senior engineer at Fermilab and did a great job of work in the building of their CDF detector which is one of the most important Particle Physics experiments - they have an excellent chance of being the first to discover the missing top quark. His closed cell works as a null experiment like the Wheatstone Bridge, so that as excess heat is observed, the input heating is decreased to preserve a constant temperature - this means that there are no complicated calculations of sudden artificial temperature rises induced to observe the subsequent cooling curve to calibrate the system. His system is accurate to a few mWatt. Between mid-September and mid-October, he observed excess heat of just under 1% which he described on the fusion electronic net, but since has found that there was a subtle drift in his calibration so that there was no excess heat. It is interesting that while most people who have announced an erroneous result and then found their mistake, do not announce this, Tom has make an equally public retraction on the net - a sign that he is a good scientist. Thus it seems difficult to confirm the first Takahashi result). 3.4 Dr. DE NINNO of Frascati described the transport of deuterium in Palladium. (She did not report any continuation of the Frascati experiments which caused such excitement in April 1989. These involved warming up from liquid nitrogen temperatures and claimed to observe neutron emission near -30 C). 3.5 Dr. M. OKAMOTO reported that they had repeated the Takahashi technique of low and high loading and found neutron emission from 4 out of 8 runs but of very low intensity. The neutrons had two components, a weak 2.45 MeV component and a stronger component at higher energy whose origin is uncertain. They believe that they have confirmed the Takahashi result (however the neutron intensity seems very different - paper awaited). 3.6 Stan PONS began his talk by showing a short video of four cells with different inputs. Each cell boiled off its liquid after a different number of days. The cells seemed to be operated in the 60 to 80 C temperature range - it was said that the condition for success was to operate near the boiling point. This worried some as the corrections are much larger at high temperature. Some felt this was impressive proof, others that there are many different ways to make a cell with palladium boil (eg G. Kreysa et al., J Electroanal. Chem. 266(1989)437). The demonstration was not convincing to scientists as it needed more information - one would like to see the demonstration repeated in the presence of someone like Tom Droege to watch and test and preferably also with several video cameras. One striking feature of the video was the extremely small size of the cell, barely thicker than the thumb of the person holding it. Later the volume of the palladium was given as 0.0785 cm3 - this is much smaller than in the original 1989 paper where it was written that results for bigger cathodes of 2 cm diameter would be presented, but so far it seems that the palladium used is getting smaller and smaller rather than bigger. When a serious scientist who believes in Cold Fusion was asked about it, he replied that anyone who works in electrochemistry knows that it is better to have small electrodes. When it was suggested that this was bad for the commercial use of Cold Fusion in large, one Gigawatt, power plants, he replied "Ah". In reply to a question as to whether Cold Fusion was a surface or volume effect, Dr. Pons replied that it was a volume effect. He said that they were just entering their new building at the IMRA technical centre and showed photographs of it. He said they had 32 employees. What was remarkable about his talk is that he did not mention the recent paper by himself {S. Pons and M. Fleischmann, Il Nuovo Cimento, 105(1992)763 } entitled "Concerning the Detection of Neutrons and Gamma-rays from Cells containing Palladium Cathodes Polarized in Heavy Water". This is an interesting paper as it appears to be an attempt to answer criticisms and to discredit the experiment of Mike Salamon et al. which was done in their Utah laboratory beneath the table on which were 4 of their cells, and which found nothing. Since this was not presented, it will be discussed in the Notes at the end. 3.7 S.I. SMEDLEY of the Stanford Research Institute gave a talk on "Issues relating to the Safe Operation of Electrolysis Cells" which was mainly about the accident that cost Andy Riley his life. He said that many people had experienced explosive situations with the electrolysis of Palladium but until January without serious consequences. The pressure had risen to 30 atmospheres before suddenly rising to 300 atm. so that a six-inch steel cylinder hit Andy. There was no radiation. He suggested various safety precautions such as having a strong shield against explosions and not removing the cell until it was sure that the cell pressure was one atmosphere. Also he was wearing safety glasses which surely saved his eyesight. He paid tribute to Andy as a fine person as well as an excellent materials scientist, which was also my opinion as I greatly appreciated Andy. This was not an easy talk to give, but Dr. Smedley gave a sympathetic and well-balanced report. 3.8 PANEL on Theoretical Models, HAGELSTEIN, PREPARATA, ROMODANOV, VIGIER Each participant talked of his theory. The Chairman asked if there was a critical experiment. Peter Hagelstein replied that the observation of isotope shifts was critical, 6Li to 7Li, 10B to 11B, potassium to calcium. Guiliano Preparata said that Cold Fusion was complicated but the production of helium was crucial. Dr. Romodanov said the only way to prove Cold Fusion was to do reproducible experiments. Dr. Vigier said that this conference had proved that excess heat was obtained with heavy water and probably also with light water; the crucial experiment is to prove that light water gives excess heat - he predicted that it would. Dr R.T. BUSH said that light water work is being done successfully and correlated with excess heat - Bush, Fusion Tech. 22(1992)301. It is called alkali-fusion since potassium is changed to calcium). Dr. MALLOVE said that light water works. Dr. Vigier agreed and said the interpretation was non-nuclear and one should vary the mixture of D2O and H2O to prove it. Dr. Hagelstein said that claims of 200 MJ/mole implied 200 eV per atom which was difficult to explain by chemical means. Dr. Preparata was asked if his theory was different from ordinary quantum theory and if so what what other predictions were made. He replied many. Dr. Chubb cried "That's wrong, that's wrong". Dr. Preparata, equally strongly, cried "It is right". 4. SATURDAY 24 OCTOBER JONES, YAMAGUCHI, MILES, IIDA, KASAGI, CECIL, TSAREV, GOZZI, MORRISON. 4.1 Steve JONES started by emphasising that there was no correspondance between the claims of excess heat and nuclear products - if the excess heat claims were true, then for one Watt, about 10 E12 reactions per second were required which would yield very large amounts of nuclear products or ash. Thus for the DD reaction to give helium, some 2ml of helium should be produced if this reaction gives 100MJ of energy, which should be easily identifiable. The critical test was observation of X-rays. They had done experiments showing that the K(alpha) spectrum had a strong peak at 21 keV from palladium. The attenuation in D2O liquid was only 60% after 2 cm. For one watt, the 3 MeV protons should produce 600 K(alpha) X-rays per second. They had now made a small X-ray detector which could be fitted inside an experiment. He has offered this to Dr. Takahashi who agreed and a test will take place on Tuesday October 27th (Note added - Steve went to Dr. Takahashi's lab as agreed with his X-ray counter; but could not perform the measurement of X-rays - Dr. Takahashi could not make his experiment give Cold Fusion plus Steve had some trouble with his counter). They are running neutron counters in a low background (0.4 counts/hour) tunnel (they call it Pico Gran Sasso) and have observed 12 neutron bursts. The Provo Canyon lab has been set up with the support of EPRI and is a $1 million facility. He said that they are given encouragement and advice from Al Mann, Steve Koonin, Charles Barnes and others (suspect this does not mean that these three people believe in Cold Fusion). Steve Jones reported on their work in Japan where they are running in the Kamiokande water Cherenkov detector with cells with cement in them as they are interested in Cold Fusion in Mother Earth. They ran in March/April 1991 and from October 1991 to February 1992. When loaded with deuterium gas they observed neutron bursts, but not with hydrogen gas. With electrolysis and titanium loaded with D2 gas, the number and multiplicity of the bursts is different from that expected from uranium contamination. A plot was shown of the multiplicity observed and that predicted from the earlier Menlove et al. results where some agreement was obtained for low multiplicities up to 20, but not for high multiplicities. These results are being checked in the BYU tunnel where they are using fast-setting cement which allows the cells to be prepared in one day and not weeks. The statistics are low but agree. He finds this a good trigger for Cold Fusion and intends to continue these studies in Utah. Note; The initial reason for the Kamiokande experiment was to repeat the Jones et al. and Menlove et al. experiments using palladium and titanium. These experiments which occupied most of the running in Kamiokande, were not mentioned by Steve but are discussed in section 4.9 below. In earlier versions it was intended not to discuss the cement experiments for reasons of politeness, but following remonstrances and claims that the cement results are very important, it seems that some comments are required though reluctantly. The aim of the Kamiokande experiment was to measure nuclear products from Cold Fusion cells, these nuclear products producing Cherenkov light which is ultimately detected. Many nuclear products can do this - gammas, electrons, alpha particles, neutrons, protons if energetic enough. The Jones experiment was designed with the hope that the events would be mainly produced by neutrons, though for example, 24 MeV gammas would also give events. Kamiokandee has made an enormous effort to remove radio-activity from the water, from the air (since radon is always present in mines), and from the materials used. To put palladium and titanium which are low in radio-active contamination is reasonable and a fairly clean experiment can be done and interpreted in an unambigous way. However the same cannot be said about cement. Everyone working with neutron detection knows that cement and many other common construction materials contain large amounts of radio-active materials and should be avoided. The random neutron emission was so high that the Kamiokande group found that it was interfering in a significant way, with their solar neutrino studies and asked them to desist (Kamiokande measures about one neutrino cominf from the Sun per ten days roughly, which is why they make such an effort to reduce radio-active background). Recently on the Email net John Hawkinson gave a reference; "Radioactivity in Consumer products" NUREG/cp-0001, US Regulatory Commission, August 1978. Some numbers; generally cements have 1.1 pCi per gram for U-238 and 0.4 pCi per gram for Th-232. Gypsum from phosphate mining has appreciable radioactive ores and phosogypsum from the manufacture of phosphate fertilisers gives phosphogypsum and 20% of that goes into Portland Cement. Phosphogypsum from Florida has 33pCi/gm of Ra-226, 6pCi/gm of U-238, and 13 pCi/gm of Th-230; from other states other rates. Since these cements can produce a variety of radio-active decay or fission products, it would seem normal to avoid them since it is unlikely that one can do a clean experiment where one can interpret the results with confidence. The argument has been made that "Mother Earth" has Cold Fusion and that is why cement should be used. Some points; A) the justification for this hypothesis is that isotope ratios vary from place to place in the earth - but it is normal to expect variations in isotope ratios with atom bomb tests, accretions of radio-active material, cosmic ray reactions, etc. Such normal causes should be invoked before assuming Cold Fusion. B) One should always try to arrange an experiment so that as far as possible one knows what one is doing so that the results can be interpreted and have some meaning. For example should one wish to study "Mother Earth", one should start by finding out what "Mother earth" is. Most people do not consider cement as "Mother Earth". 4.2 Dr. Eiichi YAMAGUCHI of NTT said many researchers had succeeded in finding evidence for Cold Fusion but no one had direct evidence for nuclear products detection "in situ". Now for the first time they have succeeded in the real time observation of helium using a quadrupole mass spectrometer of high resolution (0.001 amu at 4 amu). The amount of helium gas was strongly correlated to the excess heat evolution and increased with increasing the loading ratio of D to Pd. Also tritium production has been observed as HT. But when the system is loaded with hydrogen, H, neither helium or tritium production is observed. Simultaneous measurement of charged particles gave alpha particles of 4.5 to 6 MeV as well as protons of 3 MeV but as the amount was extremely small relative to helium production, this "strongly suggests" the occurrence of a new class of nuclear fusion in the system Pd:D(H). These are remarkable claims, so was very surprised to hear at the Round Table next day Dr. Yamaguchi give some additional results when he stated that with hydrated palladium (ie with light hydrogen), a heat increase was observed but neither helium nor tritium was found(note that this is in their paper). They interpret their results by suggesting that the main reaction is; d + d ---> 4He + photons/phonons This follows Nobel laureate Schwinger who said in Z. Phys. D, 15(1900)221 that the reaction p + d ---> 3He + photons/phonons was favoured over the dd reaction. Since these reactions are less than the normal strong reactions giving neutrons, tritium etc., then a "new class of nuclear fusion is required in the system Pd:D(H)." This is a very strong statement in their abstract. Their basic idea is to cover one surface of a thin palladium plate with an oxide barrier which is a surface barrier for the out-transport of deuterium, then the Pd plate is loaded with D2 gas of about 0.5 atmospheres giving a measured loading of about x = 0.6. Then a thick gold film is deposited on the other side to prevent d ions escaping there. Then a vacuum is created on the oxide side. They mention their earlier work, reported at the BYU conference (AIP 228(1990)354 ) where they claimed "gigantic neutron bursts" of a few million neutrons for a few seconds and excess heat, but the only evidence that they presented for excess heat was the statement that the gold annealed to the palladium which they estimated gave a temperature of 800 C. This is not usually considered evidence for excess heat as normally careful controls and checks are done. In the next tests, strong currents - 5 to 7 A are mentioned - were passed through the plates. There are two plates, A and B, which are said to be "equivalent" but the curves of temperature variation are different and no comment is made. The maximum temperature measured now, is about 200 C and this seems to be taken as evidence of excess heat - again no controls and calibrations are reported and no estimates of the amount, eg watts/cm3, are given - unusual. The mass spectroscopy is only done near mass 4 (Dr. Yamaguchi said it takes about a week to set up as it is so precise) and peaks are expected at 4.00260 amu for 4He, 4.02388 amu for HT and 4.02820 amu for D2 - the accuracy claimed is 0.001 amu. It is claimed that with D2 gas a peak is seen at the HT mass value and this is evidence for tritium - but this peak is bigger than the D2 peak which is remarkable as it means the Tritium has to be produced in very large quantities and has to be very efficient in finding H ions to give such a big peak at the HT mass. Peaks are observed developing at the 4He mass as time increases - a major question is whether there is any glass in the system for Nate Hoffman said he has spent 6 months repeating the Paneth and Peters 1926/27 experiment and has shown that glass always contaims some helium and if hydrogen( or deuterium) gas is passed over the glass then some helium comes out and will give a signal - a question that is not clear. Again no measurements are given of the quantity of helium and tritium produced. (Note - at first the presence of glass in the apparatus was denied, but it seems that there was probably some - Drs. Scarramuzzi and Sanchez will be able to say since they were to visit the NTT laboratories after the conference and their reports are eagerly awaited). The charged particle detectors give rather poor statistics (one peak seems to have four events in it) and the interpretation is unclear. The plate undergoes plastic deformation which indictes that violent processes are taking place - experience has shown that such violent processes can cause artifacts eg false signals in a neutron counter, and it is wise to perform many careful checks and quantitative measurements before claims are made. Overall the experiment is unconvincing. 4.3 Drs M.H. MILES and B.F. Bush reported on a search for anomalous effects. While earlier 2 palladium rods gave excess heat 7 times out of 8, a batch of 8 new palladium rods gave no significant excess heat. Studies of helium production are hindered by this - earlier measurements gave 2 E11 helium atoms/sec. Increases in tritium could be explainable by normal enrichment during electrolysis. 4.4 Dr. T. IIDA (and Dr. A. Takahashi et al.) reported work with deuteron plus He and H beams of 240 keV (ie lukewarm fusion). In addition to the expected particles they also found peaks at 3.6 and 8.0 MeV of alpha particles. Dr. TAKAHASHI explained these surprising results as being caused not by lukewarm fusion but by Cold Fusion with multibody reactions, eg ddd, pdd where the three ions react together according to the theory he has developed to explain his surprising results (it is not clear how the high multi-Coulomb barrier is overcome). 4.5 Dr. KASAGI studied lukewarm fusion using deuterium ions of 150 keV. Some unusual peaks were observed. 4.6 Dr. F.E.CECIL - sorry have no notes on his talk but the abstract says that charged particle emission was studied with silicon surface barrier detectors, from titanium/palladium cathode glow discharges in D2 gas. The voltage varied between 500 and 3000 V. It was concluded that some of the observed burst events appear to be real particles from nuclear reactions at the cathodes while others appear to be electrical pick-up by the detectors from the randomly occurring sparking. 4.7 Dr. V. TSAREV was replaced by Drs. KALIEV and KUCHEROV who gave talks claiming strong alpha particle and gamma emission which was reproducible. Nate Hoffman commented that the waste material from Russian reactors contains a high fraction of palladium - this waste material has been used to extract palladium which is sold commercially at a very reasonable price. Hence anyone using Russian palladium should check whether it was highly contaminated with radioactive decay products which would give off many alpha and other decay products. 4.8 Dr. GOZZI reported that they had 60 neutron detectors which in the 15 days 29 September to 12 October had given bursts of multiplicity up to 340 and which were in coincidence with excess heat. No tritium was observed (note this is the opposite of many groups who claim that tritium production is a thousand to a hundred million times stronger than neutron production). Steve Jones said that as neutrons were slowed down in the polythene to thermal velocities, they should have been observed in all neutron counters not in just one sector. Preparata - "You calibrated it". Gozzi replied by showing a graph of the efficiency as a function of the group which showed that the efficiency was very low except in a few groups where it rose to 0.06. Steve said he still did not understand and they should discuss it later. 4.9 D.R.O. MORRISON gave a review of Cold Fusion Experiments. He emphasized the Universality of Physics - the same physics laws apply on earth, in the Sun, in Supernova, in pulsars where the density was 10 E14 times that on earth. He recalled the basic reaction chains in the Sun noting that dd fusion was not important, though if its rate was increased by 10 E 40 as some suggested this might be noticeable. The dd reaction gave a compound nucleus which lasted about 10 E-20 seconds before decaying and it always decayed the same way, independent of its formation. The two main strong decays were to (3He + n) and to (t + p) with a 1 to 1 branching ratio while the electromagnetic decay to (4He + gamma) was lower by a factor of ten million (Frank Close explained to me that there is another factor from spin apart from alpha, the fine structure constant). This had been shown experimentally at the Second Annual Cold Fusion Conference by Davis et al. who confirmed the ratios of 1:1: 10 E-7 down to about 2 keV. Dr. Preparata intervened and loudly said the speaker was insulting us, this was an academic lecture and was all well known. After a pause, the speaker continued and noted that these branching ratios of neutron to tritium of one to one and helium4 being ten million times less, had been confirmed at zero energy by muon catalysed fusion at which subject Steve Jones is a world expert. With dd fusion, the primary products were neutrons, tritium, gammas, 4He, 3He and protons while an important secondary product was X-rays of 21 keV produced when energetic charged particles such as 3 MeV protons, passed through palladium. The first four of these (n, t, gammas, 4He) all had major problems due to the ease of artifacts producing false readings. However 3He, protons and 21 keV X-rays were relatively clean and reliable measurements. As Cold Fusion is potentially so exciting, many fast experiments have been done and presented before all checks have been made. Corrections and retractions are not always presented using the same media. The problem is how to get a fair unbiassed set of data to review. Have used the bibliography of Dieter Britz which most people consider unbiassed. He takes only papers which have been published and which therefore have been refereed. The set is up to 3 October 1992. It contains 727 relevant papers of which 256 are experimental results, 239 are theory and 232 are Others( 64 reviews, 76 technical, 35 comments, 6 rebuttals, 36 repeats and 15 {not cold fusion, eg lukewarm fusion). The Experimental papers were 86 positive(ie supporting the existence of Cold Fusion) and 136 null papers (finding no evidence and giving upper limits) while 34 were indecisive or contradictory. There was a problem that some papers were very poor (eg 2 standard deviation effects, no hydrogen control, no calibration, only one neutron counter, no check for artifacts, etc.) but to be as kind as possible to Cold Fusion, and to avoid any accusation of bias, all were taken as evidence of Cold Fusion if the authors said they were evidence. A page of 11 figures was shown giving firstly the numbers of papers as a function of the year - for experimental papers there were 72 in 1989(9 months), 128 in 1990, 48 in 1991 and 8 in 1992(9 months). Of the 8 in 1992, 6 were null, one was positive and one was indecisive. Thus it can be seen that interest in Cold Fusion peaked two years ago and is fading fast. Secondly on this page, the numbers of results for each kind of effect (excess heat and nuclear products) were given. For each effect the number of null results was greater than the number of positive results. For the case of the three products which were relatively free from artifacts, the numbers were; Protons - 11 null and one positive 3He - 8 null and one positive X-rays - 7 null and zero positive. Although one says "do good experiments", many are still inadequate. To list these is unsocial, hence the other alternative was adopted and good experiments were selected. One criterion is number of effects measured - it was shown that when many factors (eg excess heat, neutrons, tritium etc.) are measured simultaneously, null results are much more frequently obtained. Again the 727 papers listed were studied to see which ones Dieter Britz had considered as "expert" - note this was his opinion, not that of the author. The names of the first author of 'expert' papers are; Aberdam, Armstrong, Bacej, Baranowski, Bennington, Besanbacher, Blaser, Bulloch, Case, Cheek, Chemla, Divisia, Flanagan, Gottesfeld, Hayden, Ilic, Kreysa, D. Lewis( not the Lewis from Caltech), McCracken, Menlove, Morrey, Naerger, Olofsson, Paneth, Porter, Riley(who died tragically), Rugari, and Williams. It is to be hoped that serious students of Cold Fusion have already read most of these papers, or if not, will do so soon. These papers are classifed as one positive, 19 null, 2 unclear and 6 technical. Another criterion of good experimental technique, is that the authors make a point of saying that they looked for artifacts. Dieter Britz mentions 18 such papers which are composed of one positive, 14 null, 2 unclear and one technical. Again most careful workers do not find any Cold Fusion effects. As loading is said by many to be crucial in achieving positive Cold Fusion effects, the 727 papers were scanned for values of loadings measured. 52 papers reported loadings - of these 16 were technical and 36 experimental; these 36 gave 3 positive, 31 null and 2 unclear. Taking only the graph of loading by electrolysis of palladium, there is a broad peak in D/Pd near 0.8 to 0.85. Many authors comment that there seems to be a maximum loading. This graph is very similar to that of Mike McKubre with a peak in the same place near 0.83, but with his higher statistics, his plot extends to higher values of just over one, and also has a much wider tail down to zero (being unpublished the McKubre results do not qualify). Other results quoted this week are Claytor D/Pd = 0.82, Kumimatsu 0.88, Enyo 0.9 and Fukai 0.83. A further point is that it seems a surprisingly high proportion of experiments with positive results do not measure their loading. Note - the most reliable method of measuring loading is by diffraction - the best is neutron diffraction though X-ray diffraction can also be used. This could be used as a calibration for other techniques such as resistance measurments, but these all have problems and should be considered as having appreciable errors which vary with time and conditions. In one experiment the cathode extended outside the cell and diffraction measurements were made on this extension, but it was not too clear how one was sure that the loading inside was the same as that outside. From a review by Ed Storms, a graph was shown of the log of the number of neutrons against the log of the number of tritium atoms - it could be seen that there was no correlation, the ratio of tritons to neutrons varying from one thousand to one thousand million. A different explanation is that if there are three standard deviation fluctuations in the measurement of neutrons and three standard deviation fluctuations in the measurement of the tritium, then such ratios are expected - the reason is that neutrons are measured directly whereas since tritium has a half-life of 12 years, only the very small fractionof tritium atoms which happen to decay, are measured during the short time of the measurement. That is, this tritium/neutron ratio is consistent with there being no Cold Fusion, only fluctuations. Another graph is of the log of excess power, watts/cm2, against the current (linear scale); a line is drawn which does not fit the data but does indicate that as the current is increased there is a saturation in the Watts/cm2 at about one watt/cm2 which seem contrary to the idea that if only the current density is high enough, then the loading will pass some critical threshold and Cold Fusion will occur strongly. Another interesting point about the graph is that it shows the original values of Fleischmann and Pons who found considerable excess heat at the very low current density of 8 mA/cm2 (indeed in their paper they wrote over 1000% excess heat is obtainable but the only occasion was with the lowest current density of 8 mA/cm2). The point is that Dr. R.T. Bush finds that they obtain excess heat with normal light water but when Morrison asked him whether this was in contradiction to Fleischmann and Pons who find excess heat only with deuterium and believe that it is fusion because they do not find it with light hydrogen, Dr. Bush replied that it was different because he works only at very low current densities, 1 to 20 mA/cm2, he said. However it was pointed out that Fleischmann and Pons also obtained excess heat in that region with 8 mA/cm2. Dr. Bush then pointed out that he used nickel and not palladium, but Morrison asked if in his theory, were nickel and palladium not the same - Dr. Bush replied that they were and therefore light water should have given excess heat with palladium (please note that the statement of the equivalence of nickel and palladium in this context, was a theoretical statement of Dr. Bush and not by anyone else). It is surprising at this conference that people do not jump up to point out the contradiction that some people use light hydrogen as a control and find no excess heat while others do find excess heat with light hydrogen. In March 1989 in Utah, the press conference announced that Cold Fusion gave both excess heat and fusion products, that is it was a fusion process in which mass was converted into energy. There were great hopes of a "Clean, virtually inexhaustable source of energy" - though it must be said that Martin Fleischmann demurred and was more cautious. However it was quickly realised that there was an enormous contradiction as one watt of power should have given a million million nuclear reaction products per second which would have killed everyone around, but the measured nuclear products were many orders of magnitude less - about a million million times less as Steve Jones pointed out. Thus Cold Fusion claims split into two parts; a) Excess heat - Fleischamnn and Pons - Watts/cm3 b) Fusion Products - 40 000 neutrons/second according to F&P - 0.4 neutrons/second according to Jones but 10 E12 neutrons/second were expected if fusion. An important point is that both Martin Fleischmann and Steve Jones said that there was no secret - just a simple table-top experiment as one said. Thus to obtain Cold Fusion there was no need for any dynamic process such as heating, cooling, varying current as in Takahashi style. It should work just by simple electrolysis even at low current densities such as 8 mA/cm2. Now these two original experiments have been severely contested over the years and it is clear that if the two original experiments which began the current Cold Fusion excitement, are shown to be untenable, then the very foundations of Cold Fusion should crumble. In addition to these earlier criticisms, recently two major results have appeared that would appear to contradict the two foundation results. It is important to consider them and their rebuttals. Initially Steve Jones et al. reported in Nature in 1989 that in 14 runs, one of the runs gave a neutron rate of 0.4 n/second for 7 hours; this value was re-evaluated later to 0.06n/s by taking the average over all 14 runs (from this one can calculate that the total running time of the 14 runs was about 47 hours but have been told recently the value is 79.3 hours) This was using electrolysis with a palladium cathode. Later Steve and Howard Menlove did another experiment with titanium which was lightly loaded with D2 gas, in which they claimed large neutron bursts of up to 80 neutrons counted ( corresponding to 280 source neutrons after correcting for efficiency) in a time interval of 128 microseconds; they were especially frequent after cooling with liquid nitrogen and then in warming up, the bursts being observed near -30 C. They also observed two bursts of 17 and 5 hours in 1703 hours running, or one burst per 850 hours. Thus there were three effects claimed; FEW-HOUR BURSTS; three bursts have been observed of several hours duration - it may be noted that the latter two bursts are only about 10% higher than the background but are statistically significant, though it is not clear whether they could be the tail of a large statistical distribution. MICROBURSTS; bursts of neutrons lasting less than 128 microseconds. TEMPERATURE EFFECT; the microbursts are preferentially emitted near -30 C. Note - it does not seemed to have been commented that these two types of burst differ in time by a factor of more than ten million - a theoretical explanation does not seem to have been attempted. Steve Jones, Howard Menlove et al. have placed Cold Fusion cells in the centre of the 3000 ton Kamiokande detector. As the Kamiokande detector is in a mine (visited it on 21 October when at the Neutrino Astrophysics conference held at Takayma and Kamioka - the experiment is impressive) and as it has large veto counters and careful control of radon and other possible radioactive backgrounds, very low backgrounds are obtained, hence the previous values of 0.4 or 0.06 neutrons/second should now have been very clear. The experiment is described in a thesis by Taku Ishida which is admirably written and which explains all the corrections and results in great detail - it is well worth reading just for the pleasure of its clarity, apart from its interesting results. They started running in January 1991. At first they tried electrolysis with palladium and titanium cathodes but observed almost nothing, then with titanium loaded with D2 gas and again observed almost nothing. They then switched to cement which gave so much activity that it was suggested that they continue elsewhere. The results are; FEW-HOUR BURSTS; Ishida writes "Random neutron emission (ie few-hour bursts) beyond the background level has not been observed both for the cylinders (ie gas) and from the electrolysis samples." the numbers are; Pressurized D2 gas Flux upper limit = 0.00008 neutrons/second at 90% confidence Total live time = 1310.7 hours Electrolytic cells April set, Flux upper limit = 0.000098 n/s at 90% confidence Total live time = 387.2 hours. April set, Flux upper limit = 0.000057 n/s at 90% confidence Total live time = 569.7 hours. Comparing these results with a total running time of 2267.4 hours, to the 0.06 neutrons/second claimed by Jones et al. in 47 hours, there would seem to be disagreement. (Further it may be noted that the mass of the titanium in the Jones et al. experiment was 3 grams whereas the average mass in the Kamiokande gas experiment was 339 grams). MICROBURSTS i) Menlove et al. made a claim to have observed bursts of neutrons in a time of 128 microseconds. In real numbers they claimed to have seen many with 30, 40, 50, 60 and even 80 neutrons in the burst. Correcting for efficiency they claimed between 10 and 280 source neutrons (below 10 was background). In the Kamiokande gas experiment there were zero bursts which gave 4 or more real neutrons, ie there were zero bursts giving 10 or more source neutrons. This is the basis of the conclusion that the Kamiokande gas experiment is in disagreement with the Menlove et al. claims. ii) In the Kamiokande electrolysis experiment, two bursts were found with a multiplicity of four. That is two bursts had about 11 source neutrons. But none were observed with between 15 and 280 source neutrons. That is no bursts were observed for most of the the region 10 to 280 and two were observed in a very small segment, 10 to 15. Now the Menlove et al. claim is for the range from 10 to 280 source neutrons - if it is correct, it should be correct for the entire range not just a little corner. This a major disagreement and is the basis for the conclusion that the Kamiokande electrolysis experiment is in disagreement with the Menlove et al. claims. TEMPERATURE EFFECTS With the experiments with titanium and D2 gas and warming up from liquid nitrogen temperatures, "bursts" of 2 or 3 neutrons were observed (with an extended interval of 500 microseconds, not 128 - not very important) but none of these occured during the warming up period. It is concluded that there is no evidence for a dynamic effect near -30 C as previously claimed. There has been some discussion as to what the observed bursts of 2, 3 or 4 neutrons could be. This may be intersting, but in no way changes the three conclusions reached above. One obvious interpretation was that this was radioactive contamination for uranium fission can give up to six neutrons and plutonium up to seven which gives about the observed multiplicity distribution, but not exactly. There have been claims that this may be a new phenomemon at an ultra low level. Maybe, but it should be noted that a) Kamiokande does not measure neutrons - it measures Cherenkov light. When an atom fissions, it emits not only neutrons directly but the fission products plus the decay products of the short-lived elements formed. Thus there is also emission of gammas, electrons, alphas as well and, if these are energetic enough, they could also give Cherenkov light eventually. These simultaneous (<500 microseconds) emissions would change the rate and the multiplicity distribution. So the situation is complicated and not merely the metal of the cathode must be considered, but all the components including the brine and the deuterium. b) It is not safe to use hydrogen in place of deuterium as a background because while gammas do not give photo-disintegration in hydrogen, they do give photo-disintegration in deuterium producing neutrons. Such photo-disintegration would give additional simultaneous neutrons which would change the rate and multiplicity distribution. (NOTE - as these comments were contested, a complete review of the Jones et al. experiments with palladium and titanium has been written and is issued separately - the conclusion is that all the experimental claims made in Jones et al. and in Menlove et al., are disproved by the superior Kamiokande experiment with its very low background). The General Electric paper, Wilson et al., J. Electroanal. Chem 332(1992)1, includes Fritz Will as an author before he left to become Director of the National Cold Fusion Institute in Salt Lake City. It consists of two parts. Part 1 is experimental. It describes briefly a long series of experiments firstly repeating Fleischmann and Pons's experiments as exactly as possible (since there is no secret, this is OK), and then variations and improvements some of which gave very high quality experiments. They find no excess heat and no neutrons nor tritium nor 4He. Part 2 is a very complete discussion of the analysis of the Fleischmann and Pons experimental data. They find that the excess heat is generally overestimated and that control samples using hydrogen which F&P claim gave no excess heat, should have indicated excess heat if the analysis had been performed as described. (More details of this are given in the Email "Cold Fusion Update No. 6). The rebuttal of Fleischmann and Pons is given in the next paper, J. Electroanal. Chem 332(1992)33. it says that the paper of Wilson et al. is "a series of misconceptions and misrepresentations".... "gross errors". Then follows 20 pages of calculations etc. with the comments; 1) Fleischmann and Pons say that Wilson et al. "have not provided sufficient information". Agree, but one can ask GE for data and hope to get it. It would be good for Science if both sides were to exchange data. 2) Wilson and others say that the use of non-linear regression analysis and Kalman filtering is unnecessarily complicated (F&P say it is standard but when the audience at Nagoya was asked if they had recently used a non-linear regression analysis to obtain excess heat - no one answered). 3) Fleischmann and Pons say that "the precise control of the level of the electrolyte is hardly feasible" and this justifies the complicated analysis, but if a closed cell is used, then the level is constant. 4) This argument between leading scientists is disagreeable - in view of the crucial importance of the Fleischmann and Pons experiment to Cold Fusion, it should be resolved. Fortunately this can be done simply by Fleischmann and Pons doing a clean simple experiment with few corrections in a closed cell immersed in 3 constant temperature baths as was done by their good friend David Williams at Harwell using the device used for evaluating the amount of plutonium in samples. This is a null measurement like the Wheatstone bridge, ie if excess heat is produced, the heaters that keep the 3 baths above room temperature, are lowered to keep the temperatures constant. Thus nothing changes in the temperatures so that no elaborate corrections are needed. Loading and nuclear products should also be measured at the same time. It should be appreciated that the best way for Drs. Fleischmann and Pons to answer critics would be to obtain positive results with a clean good apparatus chosen to require few corrections as above. Some Conclusions; 1. There is a major separation between experiments which measure excess heat and claim watts and experiments which measure nuclear products which find 10 E-6 to 10 E-16 watts. 2. The positive experimental claims are highly dispersed and inconsistent with one another. Some experiments are poorly designed and artifact-prone with the consequence that artifacts are claimed as results. Answer/recommendation is to do only good fully-instrumented and fully-calibrated experiments that need few and unimportant corrections. Always measure loading. 3. Several experiments claim that Cold Fusion occurs in normal light hydrogen. This is in direct contradiction with most previous Cold Fusion claims which said the reason one knew it was Cold Fusion was because it did occurred with deuterium and did not occur with hydrogen. It is not possible to believe both sets of claims simultaneously. 4. There are an enormous number experiments which describe the behaviour of hydrogen and deuterium in metals and these show that the deuterium ions are further apart in metals than in D2 gas - as described earlier by Dr. Fukai. 5. The two original experiments of Fleischman and Pons and of Jones et al., are contradicted by the General Electric Company's paper of Fritz Will and others and by the Kamiokande experiment of Jones et al., respectively. 6. It has been said that if Cold Fusion has a 1% chance of working, then it is worth further study. But the best estimate is not 1%. If one accepts the results from the excellent Kamiokande experimental limit of 10 E-4 neutrons per second, then the limit is not 1% but 10 E-14% or one hundred million millionth of one percent. 5. AFTER MORRISON'S TALK After Dr. Preparata's loud intervention, the rest of Morrison's talk was heard in silence, but after he finished the Co-Chairmen said nothing, but the Conference Chairman, Dr H. Ikegami moved swiftly across and removed deftly the microphone from the speaker's jacket and the battery from his pocket and then quietened the tumult and booing by declaring that he wished to apologize to the conference. He was surprised that a scientist of Dr. Morrison's international reputation could make such a ridiculous talk and so on. A noisy crowd then surrounded Morrison so that it was difficult for the TV people to film this from close up. The loudest voices were essentially Cold Fusion propagandists and it is interesting that none of their questions or comments were direct to scientific issues but were of the nature "Have you looked at the raw data?" One particularly interesting question was "in your bibliography, did you include papers from 'Fusion Technology'?" This is interesting because this journal has a reputation of being rather kind to papers in favour of Cold Fusion - for example "Cold Fusion observed with ordinary water", "Observation of quad-neutrons and gravity decay during Cold Fusion", "Searching for tiny black holes during Cold Fusion" - was shown a photo of a black hole! The editor says that more papers are refused than accepted. The answer of Morrison was 'yes' - in order to be as kind as possible to Cold Fusion and to avoid accusations of bias, all journals that claim to have referees were taken, including Fusion Technology. (NOTE, have been told that the paper on Cold Fusion and Black Holes was rejected by a referee, but was still published to the referee's surprise - it will be interesting to hear further comments on this). After a time Morrison was removed from the noisy crowd by an Organiser who said he should attend a press conference downstairs. There Dr. Ikegami was talking in Japanese to reporters. This went on for over an hour and the phrase "Morrison-san" was heard frequently. Afterwards the meeting broke up and none of the reporters asked Morrison any questions though they gave their cards. After lunch there was the poster session. As requested, Morrison spread out copies of the 21 pages of transparencies on a table. Many gathered round and accepted copies of the page with 11 graphs summarizing the number of results. Dr Preparata came with his two acolytes and started attacking in a very loud voice - interestingly enough none of his comments were scientific and he did not question the accuracy of any of the 21 pages spread out. One of his accolytes then started loudly and again none of his comments in any way questioned the pages on the table though he did say he was spokesman of an experiment. Dr. Preparata was offered a copy of the page of graphs - he took it and ceremoniously tore it across and then tore it again and again before moving away. Wonder if he also burns books? After that the poster session proceeded peacefully with many friendly conversations and people were happy to have a copy of the page of graphs. It was noticable that then and the next day, the serious scientists such as Steve Jones, discussed but that the principals and other propagandists avoided the poster table. 6 SUNDAY 25 OCTOBER CLAYTOR, BOCKRIS, LI(CHINA), TSAREV(RUSSIA), SCARAMUZZI(ITALY) 6.1 Tom CLAYTOR showed a very interesting graph of the D/Pd ratios versus the gas pressure for many temperatures between -40C and +70C. In every case there was a tendancy towards saturation at near 0.8 loading though further additional pressure gave slowly increasing loadings. Also the loading was higher the lower the temperature. This is a basic graph that all are interested in. They used stacks of palladium and silicon and pulsed with a high current, and deuterium gas. Tritium was measured on-line and where it appeared, it was within 48 hours. The tritium production varied from 0.02 to 0.2 nCi per hour; it increased with current. 6.2 John BOCKRIS working with C. Chien and Z. Minevski, obtained remarkably large amounts of tritium as Chien had already found in Taiwan. Addition of fresh D2O or vibrating with a gold rod stopped the tritium production but after a few days it started again. Helium was also observed - about 1.6 E11 atoms. No 3He was observed. 6.3 Dr. X. LI gave an impressive list of institutions that are working on Cold Fusion in different regions of China. Several groups have positive results though the experiments are not too complex and there was no time to discuss controls and checks. One lab used palladium from Russia. 6.4 Vladimir TSAREV summarised Cold Fusion in Russia - there are many labs working and workshops have been held on it in Ekaterinburg and Donetsk. Many of the results sounded most impressive with claims of 500% excess heat and 100% reproduciblity but there was not time to determine the quality of the checks and calibrations and to understand which labs were using Russian palladium which could be heavily contaminated (according to Nate Hoffman). Vladimir is an excellent cartoonist and people particularly enjoyed a drawing of a lady in Japanese costume carrying a scroll on which the equation E = mc2 is scored out and instead is written E = CF . This was much appreciated by some who found it an excellent summary, while others just enjoyed it. 6.5 Dr F. SCARAMUZZI began by talking of the "strange geography of Cold Fusion". He said that in Japan, Russia, China and India there was a co-ordinated effort. In the USA there was a negative official position with exceptions (EPRI). In the EEC, it was the same except in Spain and Italy; what is still stranger is that behind the Alps, Cold Fusion never existed. In Italy, the INFN, CNR and ENEA all fund Cold Fusion to a total of about $0.5 million (personnel not included). In the future it will be mainly INFN. He listed 7 groups (10 institutes) which are working on Cold Fusion. Most though not all are finding positive effects (he was one of the very few speakers to say that not everyone finds Cold Fusion effects - however it is a pity he did not mention the work of the Milano group of Ettore Fiorini who has the reputation of being one of the best and most careful experimentalist in Italy which is a country with a long tradition of excellent experimental work. He has performed one of the most complete and careful experiments looking for dd and pd fusion during electrolysis of palladium, plus mechanical straining to look for fractofusion. No excess heat was found and no gammas, neutrons, helium nor tritium - this in a very low background lab.). 7. CONCLUDING SESSION - ROUND TABLE MCKUBRE, FLEISCHMANN, YAMAGUCHI, PERNG, TAKAHASHI, JONES, HAGELSTEIN, HANSEN; Followed by comments from the audience. The members of the Round Table were each asked to talk for a short time. 7.1 Mike McKUBRE said that the 3C's of Cold Fusion were Collaboration, Co-operation and Correlation. After three and a half years there was no excuse for working on a single variable. All of experiments should be addressed and a correlation matrix established. The Harwell work which gave a null result, had correlations, we can similarly get information. The most interesting result is the correlation between excess power and D/Pd loading - as the loading increases the excess power increases steeply. We have to understand the role of light elements. 7.2 Martin FLEISCHMANN said most people would like to see excess heat, but we say "No mystery". You must cram the deuterium in the lattice, let the temperature rise and then get excess heat. There are three things to do - (1) link material properties, (2) link electrochemical variables, and (3) do more work. The Harwell experiment is a rich source of un-evaluated data. We will make great strides in the coming year. 7.3 Dr. E. YAMAGUCHI said the helium production was very clear in his experiment and everyone should investigate, in situ, by real-time methods. He claimed that they clearly saw charged particle emission. They cannot say if the temperature rise is correlated with 4He production. With hydrogen there was no 4He rise and no tritium but (and he said the data was not shown on Saturday) hydrated palladium did also give excess heat ie with ORDINARY hydrogen. 7.4 Dr. T.P. PERNG (ROC) talked of materials and hydrogen behaviour. 7.5 Dr. A. TAKAHASHI spoke of the need to correlate the excess heat and nuclear products - it was important to find out if there was a relation or not. He gave a list of which labs had found what ( he seemed to mainly mention 9 labs except to say that many had observed neutrons - this list was much shorter than others such as that of Ed Storms; also it was noticeable that he did not give any numbers or rates to see if the various experiments agreed; also he did not talk of the more numerous experiments that did not find any effect, nor did he quote upper limits from these null experiments). 7.6 Steve JONES said there was one form of Cold Fusion that was irrefutable - Muon Catalysed Fusion. Since 1982 it has been known that the yield depends on temperature. The yield had been found to be greater than expected - 150 fusions per muon; it took 8 years before this was finally accepted. For Cold Fusion they would continue to look for a low-level trigger. This they thought they had found - it is cement. Somoluminesence involves the collapse of a bubble and gives a temperature of a million degrees and a megabar pressure - he now calls it somofusion. This might be of interest for Cold Fusion. 7.7 Tulio BRESSANI said one should relate energy measurements and neutron spectra - one expects a neutron of 2.5 MeV. Takahashi finds 4 to 6 MeV neutrons as well. Their own group has observed 2.5 MeV neutrons and has some indication of something in the 4 to 6 MeV region though their counters have lower efficiency there. 7.8 Peter HAGELSTEIN emphasized the strong relationship between theory and experiment - he had found this out when working on X-ray lasers. While he accepted heat from Pd/D in LiOD, did not feel the same way about Ni/H system in K2CO3. He said he works in Theory but often hears "This person should not be funded as he works on Cold Fusion". On his personal wish-list, he would like; (1) the 6Li to 7Li ratio be measured (2) to know the value of the energy change in going from tetrahedral to octahedral positions in palladium (3) the measurement of radioactivity in the palladium after a Fleischmann and Pons experiment. 7.9 Dr. L. HANSEN of BYU said that while energy was on one side of the equation, there must also be molten ash. This was a criteria to judge measurements of excess heat. 7.10 DISCUSSION The Chairman, Dr. H. Ikegami invited comments from the audience. Nate HOFFMAN noted that one should be aware of what critics think. There are four artifacts that we should pay attention to; 1) A major problem. Helium diffuses through glass. Any glass in an apparatus has 4He in it and this can lead to false readings 2) gammas in Cosmic rays can give photo-disintegration of deuterium which can give neutrons 3) radon decay products can be very troublesome, giving 8 MeV alphas, also 210Pb gives a 18 keV beta which can be mistaken for a tritium decay. 4) there is liable to be some radioactive palladium soon on the market place as palladium is being extracted from Russian reactors. Hence must take care and measure the radioactivity of Pd BEFORE the Cold Fusion experiment is done. Comments were then invited from the floor. Robert BUSH stated that there was very strong evidence for transmutation of light elements in water (ie ORDINARY water). In one year overwhelming evidence. Later in answer to a question, he said that his light water work was in a closed cell. Dr. CHUBB said that there was a lack of internal review, especially of light water work. It is necessary to have outside observers as credibility is important. The loading should be given. Steve JONES announced that they are setting up to do an experiment (in D2O) with picosecond timing. The Conference Chairman, Dr. IKEGAMI asked for futher comments - silence. So everyone slowly got up and prepared to go. However after a while the Chairman called the meeting to order again. He thanked people for their presence at such an exciting meeting where we were informed that reproducible and controllable Cold Fusion had been observed. Especial thanks to Drs. Fleischmann and Pons and to Drs. Yamaguchi and Nishioka who had new and remarkable results. He said we are working for the future generation of energy in the 21st century. He said the International Advisory Committee had decide that the next Conference would be in Hawaii. The meeting closed with half-hearted applause. 8. NEXT COLD FUSION CONFERENCE - SCIENTIFIC MEETING The Third Cold Fusion conference was sponsored by several respectable scientific organisations who have a long tradition of free and balanced scientific debate. After more that three years since the 1989 Fleischmann and Pons press conference, it was well known that the majority of the World's scientists did not believe in Cold Fusion and that there were many null experiments. It was to have been expected that the Organising Committee and the International Scientific Advisory Committee would have known this and when inviting speakers, would have chosen a balance. But only one sceptic was invited (Dr. Fukai was invited as a technical expert and it was a surprise when he reported that Cold Fusion should not work from the accumulated knowledge of many experiments). The token sceptic, who has never hidden his conclusions, was apparently expected to advise on how to perform future experiments (though the abstract also said that the experimental results will be reviewed). In a normal scientific conference, more sceptics should have been invited to join the International Advisory Committee and then invited to speak at the conference. And when the token sceptic spoke, an orderly discussion should have followed. Instead of that for the Conference Chairman to take over from the session chairmen, then insult the invited speaker and close the session without any scientific discussion, cannot be considered normal scientific behaviour. It must have come as a surprise to the scientific societies that sponsored the conference. It was announced that a Fourth Cold Fusion conference will be held in Hawaii in 1994. Will this be a scientific conference? Will it be sponsored by any scientific society that believes in free and balanced debate? It is unlikely to be sponsored by the University of Hawaii as the University which initially took some responsibilty for the patents based on the Cold Fusion claims of some of their employees, organised a committee to investigate these claims and has now given up their interest in these patents. 10 CONCLUSIONS (1) Overall there were fewer presentations of positive results than in previous annual conferences. This confirms the statistics on published papers. (2) Many of the positive results tended to be "exotic" and different from the original Fleichmann and Pons and Jones techniques which were simple and "passive" unlike the present tendency towards "active" methods such as sharply varying the voltage or temperature. (3) The biggest result was that some five groups claimed that positive effects were now being observed with LIGHT water. This was a shock as previously the justification that fusion was being observed was that the positive effect was observed with deuterium and NOT with hydrogen. However this comment was not made by anyone other than myself, and I had no response. (4) Some of those claiming fusion with light water also claimed to have observed transmutation - the alchemists dream! (5) The two experiments which started all the Cold Fusion effect, have both been very seriously put in doubt. A GE group with Fritz Will, the former Director of the Utah Cold Fusion Institute, found no effects in extensive attempts to repeat the experiments. Further checked the calculations (non-linear regression analysis with kalman filtering) and found that they had major problems and had not proved excess heat existed. Also the original experiment of Jones et al. is contradicted by the Kamiokande experiment. Thus both the foundation experiments are unreliable. (6) The Takahashi et al. experiment which was welcomed and advertised, cannot now repeat the original levels of the effect claimed (this often happens to Cold Fusion groups, eg Huggins). Also he has the unique result that the yield of neutrons goes down as the excess heat increases. (7) The NTT - Yamaguchi experiment was pre-announced by a press conference before it was presented for scientific discussion and evaluation at a conference - a procedure that is generally criticised. Afterwards there were serious criticisms about glass in the apparatus and the method of measuring excess heat. Further it was later announced that excess heat was also obtained with light hydrogen. (8) The incredible 8 billion dollar movement in the NTT share value showed the powerful attraction of the dream of Cold Fusion. However the reality, the numbers, have to be looked at. After three and a half years the present claims of Cold Fusion are not substantially greater than in March 1989. And the majority of experiments find no excess heat. Further the better the quality and care of the experiments, the smaller the proportion that make claims. Further as Dr. Fukai showed, the thousands of experiments on deuterium and hydrogen in metals are against Cold Fusion. (9) There is a major contradiction between the excess heat claimed of the order of Watts, and power calculated from the nuclear products observed. This is a question of factors of millions or billions or millions of millions - completely incompatible. If the basic source of the energy is the conversion of mass to energy, then there must be some nuclear products, but no Believer has solved this problem. This alone is a major reason for concluding that there is no fusion. Some believers in the existence of excess heat then say it is not a nuclear process, but then what could it be that would be of any practical interest? (10) Many Believers in Cold Fusion genuinely want the Annual Cold Fusion conference to be a normal scientific meeting. But with the choice of speakers and rules, they have not been. This Nagoya meeting made it obvious to all that the Annual meeting is not scientific. (11) The Regionalisation of Results (CERN/PPE 90-159, 1990) is stronger than ever and was described by Dr. Scaramuzzi to the embarrassment of the audience, but without protest. (12) The overall funding of Cold Fusion is increasing. The previously known funding is decreasing and only INFN and EPRI are continuing appreciably. EPRI (US Electrical Power Research Institute) funding is partly used in the US and makes serious contributions to certain countries abroad, especially to Russia, China, etc. Figures of $3 to $12 million have been advanced but it is seldom clear over how many years this is. At the Nagoya meeting, one became aware of major Japanese funding from industry, especially Toyota and next year MITI may invest some $3 million, but it comes under the umbrella of "Hydrogen Energy Research". (13) In Japan the two most careful experiments have both given strong evidence that Cold Fusion will not give excess heat. They are the KEK experiment which was rather complete, and the Kamiokande experiment. (14) It is sometimes said that if Cold Fusion had a one percent chance of giving excess heat that would be useful for power generation, then it should be studied. But the experimental results from Kamiokande show that this number is not one percent but is one hundred million millionth of one percent. (15) If one takes all the factors, experiments, theories etc. together, the balance of evidence is strongly against the existence of Cold Fusion. Having looked at the evidence for and against, more than 99% of the World's scientists do not believe that Cold Fusion could give useful energy. NOTES. i) This is a long review with probably well over a thousand pieces of information so there must be some mistakes. Will be pleased to receive corrections. From experience expect there will be some propagandists who will use the technique employed by a few unscrupulous lawyers, of taking one error and saying that hence all must be false. Scientists on the other hand, try and take ALL data and theories and try and make sense of them - and as Dick Feynman would point out, it is sometimes necessary to make sense of all the available information, to assume that some experiments are mistaken. However doubt if a few errors will change the overall impression of the conference which was of a winding down with fewer new results than in previous conferences, an increase of propaganda and an increase of regional funding plus some extraordinary results, some of which (fusion in ORDINARY water), contradicted previous work, plus some cranks. Also some errors will not change the impression that this was not organised to be a normal scientific conference since no serious attempt was made to report the many experimental results which have made the majority of scientists disbelieve in Cold Fusion. ii) In a note it is not possible to report everything - please ask the people named for further details. iii) CURIOUS STORY. In an early partial version, a curious story was added describing how a demonstration had been set up by Dr. Notoya of Hokkaido on a table just outside the conference room. It was said to show two identical open cells with ORDINARY water but one with K2CO3 and nickel cathode, and this latter cell was much hotter to the touch than the calibration cell. This was claimed to show Cold Fusion with ordinary water. However David Buehler, a student of Steve Jones, noticed that the electrical leads were not identical, the one to the control cell was much thinner so that its resistance was higher and energy was dissipated in the thin wire and not in the control cell as advertised. He checked by moving the clip. He and Steve were savagely attacked (as usual!), but Steve showed from his log-book that the effect was serious and then later after further exchanges, they repeated the experiment in BYU based on these numbers, and showed a 10 degree temperature difference. Dr. Notoya will be visiting the States and is going to repeat her demonstration at MIT on 4 December and it is said by her propagandist that it will work, later he said it might not. Have the impression that some will try and concentrate on the size of the wires which are sure to be the same this time. However this is a red herring. The real problems are two-fold; a) one of the voltages is 1.48 Volts higher to compensate for electrochemical effects - but Tom Droege has already found that this number of 1.48 V is not safe and others have also shown this recently. So this value of 1.48 V has to be established first b) only do good calorimetry with closed cells and several constant temperature baths surrounding the cell. (It has been said one needs to do a non-linear regression analysis to obtain a result with such an open cell!) OTHER NEWS A).The Wall Street Journal of 27 November reported that NTT is selling a kit containing all instructions and equipment needed to replicate the Yamaguchi and Nishioka experiment. The price is $565 000 and it is obtainable from Advanced Film Technology INC which is 51% owned by NTT. Steve Jones says the W.St.J. quotes the NTT President, Masashi Kojima, as saying that "the result will likely be a Nobel prize for Mr. Yamaguchi" if another scientist replicates Yamaguchi's experiment, and says that NTT might "become a power company based on cold fusion", quoting the NTT President. Have just checked the NTT share price at the time of this announcement - there was no billion-dollar jump in the share price this time. B). Frank Close has been following up the way in which a first graph of Fleischmann and Pons showing a peak at 2.5 MeV moved to 2.2 MeV. He notes that this was after a talk by Martin at Harwell on March 28th, when he was told that while the neutrons should emerge with an expected energy of 2.5 MeV, they should be slowed down to thermal energies before being captured, and hence the peak should be at the lower value of 2.2 MeV. Frank says that at 09.32 on the 30th March a Fax was sent from the University of Utah Chemistry Department making the change. The graph was also changed in that the bin size switched from 100 to 200 keV, but the shape of the distribution of data points on the graph did not change. Fleischmann has written that this was a change caused by going from a linear to a quadratic interpolation - but this makes no mathematical sense. A further change was that the number of counts jumped by a factor of nine. It is hard to see how these three changes from one graph to the other, could be covered by patent secrecy. No doubt the judge in the La Repubblica trial would like to study the documents. In reply to a recent letter from Frank to Martin, a letter has been received from Mr. Triggs, the laywer of Stan Pons. He says that pending patent applications, all documents relating to work in Utah are prime source materials and are confidential. He warns Frank about the documents he has and says that there were thefts from his clients' laboratory. Now this is a serious criminal matter and it would be interesting to see the reports of the University authorities and Police on these thefts - these documents would presumably not be covered by patent problems. It should be noted that Frank has no intention of revealing any sources or information which are not already in the public record. C) The Fleischmann and Pons paper mentioned in section 3.6, firstly describes new measurements they have performed using a high resolution, but low sensitivity (efficiency) Germanium detector. One of the points they wish to make is that this is better than a low resolution, high efficiency detector as used by those who found nothing. However their new Ge detector efficiency is only 2 E-5 which is not so different from their old BF3 detector (dosimeter) which was 2.4 E-6 (this why their old counting rate was so low even though they claimed 40 000 neutrons per second after correcting for efficiency). The gamma ray spectra they present show a smooth background with some very sharp resolved peaks and there is a large sharp peak near 2.2 MeV where one expects a peak from capture of slow neutrons, the actual value being 2.224 MeV. It takes a minute to realise (and one is not told till much later) that this splendid peak is background from 214Bi at 2.204 MeV and the miserable little bump to the right of it, is the peak at 2.224 MeV - the relative peak heights is 19 to 1. Now there are neutrons everywhere, from cosmic rays, from the plaster, concrete etc. so there should be a peak at 2.224 MeV especially as the experiment has not been done deep underground nor is there special shielding. So the question is how was the normal background measured? There is no description in the paper of the measurement of this unavoidable background - so it is possible that this small peak is 100% background. However there are two measurements reported AFTER the current was switched off and these are said to extend to two diffusional lifetimes, so it is tempting to consider these as background measurements - and since small peaks are seen at 2.224 MeV of about the same height as the ones observed, one would normally conclude that this shows that there are no extra neutrons coming from Cold Fusion in addition to the unavoidable background. However such is not the conclusion of Fleischmann and Pons who instead conclude that this is an interesting and significant effect lasting up to 30 days after the current was switched off. Why did they not calibrate BEFORE the experiment began? They claim a rate of 5 to 50 neutrons per second per Watt which they note is less than their previous value of 4000 neutrons per second (the 1989 paper says 40 000 neutrons per second). They do not see this as a discrepancy, but claim this must be due to them under-estimating the sensitivity of the previous instrumentation (ie by several orders of magnitude). They claim that previous works, Petrasso et al. and Salamon et al. were insensitive because with their poorer resolution, they would not have been able to see the 2.224 MeV peak because it would be buried in the 2.204 MeV which would now be wide - and they present a graph to illustrate this. Now if the efficiency of these two experiments was as poor (2 E-5) as that of Fleischmann and Pons, this would be true. But it is not true, because their efficiency was very much higher so that for the suggested neutron rate, their peak would have been much bigger than the 214 Bi peak at 2.204 MeV and been clearly visible. To give some numbers, if their efficiency was as low as 2% which is 1000 times more than F&P's, their peak would have been 1000 times bigger and this would have been 50 times bigger than the 214 Bi peak at 2.204 MeV. The conclusion is that the paper, as presented, gives no compelling evidence of any neutrons from the Cold Fusion cells. Overall the measurement of neutrons at fairly low counting rates is not easy as many have learnt, and it is best left to experts. HAVE A NICE TOMORROW (this delightful phrase was seen in a Takayama shop window). (c) Douglas R.O. Morrison. 27 NOVEMBER 1993. COLD FUSION UPDATE NO. 8 Dear Colleagues, Have been rather occupied with other matters and have not been able to post anything for some time. Recently Mr. Rothwell referred to the work that Fleischmann and Pons published in Physics Letters A (paper communicated by J-P Vigier), and said that Prof. Fleischmann had informed him that electrical readings were only recorded every 300 seconds. This greatly astonished everyone as the most extreme claim of F&P concerned a time of only 600 seconds. This was during the period when the cell was boiling vigorously, this over the last 600 seconds before the cell is dry, "the excess rate of energy production is about four times that of the enthalpy input" and the specific excess enthalpy is 3.7 kW per cc of palladium. In June 1993, comments were written on the F&P letter and they are available as the CERN preprint, CERN-PPE/93-96. They were also submitted to Phys. Lett. A. In this comment is written; "Another important problem is the estimate of the input energy - here the input enthalpy is taken as the current multiplied by the (cell voltage - 1.54V). It is not explained how these quantities are measured. This is crucial as when the cell is boiling vigorously, the impedance must be fluctuating strongly. Thus the current will have both an AC and a DC component. If only the DC component were measured, then the input enthalpy would be underestimated. A detailed description of the current and voltage systems showing their fast response characteristics is needed, but is not presented, so that although the estimate may be correct, there is an absence of proof. Also the cell voltage over the last 600 seconds cannot be read from fig. 8 as the bin size is 500,000 seconds and the trace is rising exceedingly steeply - as this is an important question, one would have expected the voltage trace over the last 600 seconds to have been shown in great detail." Hence it seemed impossible that after so many years, and having all the expensive facilities available to them at the NCFI in Utah and with the IMRA organisation near Nice, that F&P would take data only every 300 seconds. Now this information came from a non-scientist, Mr. Rothwell, whose accuracy is variable - for example he has been writing that "Morrison was unable to get his critique published because as you will see, it lacks scientific merit. He claims, in essence, that it is possible to burn 0.004 moles of hydrogen and generate over 87,600 joules of energy." Both of Mr. Rothwell's statements are inaccurate. He adds " This clearly violates junior-high school level physics and chemistry, and so do most of Morrison's other claims". But it seemed so incredible that Mr. Rothwell was correct and Fleischmann and Pons really did after all this time, measure only every 300 seconds, so felt that the only way to be sure, was to ask one of the authors. Last Wednesday Prof. Fleischmann gave a talk at the University of Lausanne. It was very charmingly presented. Thanks to some adroit chairmanship plus interventions, very few balancing comments to explain why most of the World's scientists do not believe in Cold Fusion, were expressed, despite efforts. Since I felt my time to comment was rather limited, gave the Chairman the programme of the University of Lausanne's winter series of public lectures (Cours General Public) and asked him to announce that another point of view would be presented there, in particular when I would give the closing talk of the series on the 23 February entitled "Science pathologique; fusion froide et autres histoires". The Chairman appeared to agree and took the paper, but then somehow forgot to announce it. So asked Martin afterwards and he confirmed that the data was taken once every 300 seconds. Tried to explain about AC and DC, but somehow we did not seem to communicate. However he generously said if I asked for any plot, he would send it to me. I asked for the plot of the current and voltages during the end of the run. Martin also kindly invited me to visit their laboratory near Nice. On the net there has been great interest in the three hours after the cell runs dry. Many were astonished that with no incoming power, the cell should stay very close to 100 degrees although earlier calculations had indicated that the cell should cool down. Most people considered this an impossibility and a demonstration that there was something wrong with the experiment, but at Lausanne, exactly the opposite conclusion was extracted by Martin. He declared that the fact that the cell stays hot with no heat input, shows that something exciting is taking place. Wonder if this will be the subject of the last talk at ICCF-4, on Monday afternoon by Pons and Fleischmann intriguingly entitled "Heat after Death"? In the confused period after I questioned this impossibility, seemed to hear the statement that two other groups had repeated this work and obtained the same result - this is natural, if you repeat with the same technique, you should get the same result. On the other hand if the two groups are normal scientists, they will carry out check experiments to try and prove themselves wrong. For example a major criticism in CERN-PPE/93-98, was that during the final phases of Fleischmann and Pons's experiments, they only used D2O and did not repeat with H2O to see if they could claim it was fusion (as F&P believe) or not as J-P Vigier believes (he would expect excess heat to occur also with H2O according to his version of quantum chemistry). It will also be interesting to see if the two other groups use normal fast electronics to record the current and voltage and look for the expected fluctuations, ie AC as well as DC input. Also it will be interesting to see if they repeated the experiment with a single thermistor or whether the cell was properly instrumented with many measuring devices. It would of course, be even better if they were to have done a complete controlled experiment where they continuously measured and studied the outgoing fluids and solids (Lithium, D2, H2, O2, D2O, H2O, 3He,4He, tritium, etc.) and their heat content. And it would be even more scientific if they had followed the recommendations made at previous Annual Cold Fusion conferences, to do good complete experiments - that is to measure simultaneously with excess heat, also X-rays, gamma rays, neutrons, and protons - measuring seriously, that is the energy spectrum with good resolution capable of distinguishing the 21 keV X-ray line (as Steve Jones emphasises and even offers to provide a compact detector), gammas of 24 MeV, neutrons of 2.45 and of 14 MeV, and protons of 3 MeV. Simply using a health physics neutron counter or an X-ray plate which indicate "something" vaguely is no longer serious after so many years of Cold Fusion and now good funding. Since the piece of palladium used by F&P was so small, 0.039 cm3 (a speck) it would be normal to vary the size of the palladium cathode, eg 4 cm3, 40 cm3 (taking appropriate precautions if you believe in F&P's results). Think one of the new groups was from the CEA (French Atomic Energy commission) in Grenoble. Wonder if the CEA knows? Steve Jones has continued the BYU habit of doing simple experiments which test vital claims. When was in BYU a few months ago giving a lecture, was shown by Prof. Lee Hansen experiments with calorimeters to study whether or not there could be recombination of hydrogen (deuterium) with oxygen to form H2O (D2O) plus heat, in Fleischmann and Pons type cells - they have always denied it and cite complicated calculations (have they ever done any experiments on this?). However Lee did two simple experiments. Firstly he operated the cell with the anode and cathode very close together as F&P so that there was a chance that the hydrogen and oxygen emitted by the two electrodes could mix and possibly recombine - assuming no recombination, he calculates that he had then observed excess heat. He now moved the anode and cathode apart, and as he did so the apparent excess heat vanished. This he interpreted as evidence that recombination was occuring in the F&P - type conditions and could be falsely interpreted as excess heat. Just in case of any doubts, he did a second experiment - with the electrodes close together as F&P and searching for excess heat, nitrogen gas was blown in at the bottom of the cell - this one might expect to reduce the mixing of the hydrogen and oxygen and hence reduce the recombination. He now calculated no excess heat. It is to be hoped that those groups making claims of excess heat, will do these simple control experiments - at the very least vary the separation of the anode and cathode. Steve Jones has now repeated the F&P experiment as described in their Phys. Lett. A paper. Except he used H2O instead of D2O - and observed boiling (if you believe this is manifestation of excess heat, it indicates it is not fusion, and J-P Vigier should be happy while other theoreticians such as Preparata, Bressani(also experimentalist) and Del Guidice who declare it is fusion, should be unhappy as it implies Cold Fusion is not Fusion). Steve followed F&P in keeping the current constant at 0.5 A. This meant the voltage could vary, and unlike F&P did not sample it every 300 seconds but recorded it on a strip-chart recorder. He wrote "As 100C was approached, the voltage rose quickly from 20V to 75V, then we observed rapid fluctuations during the boiling, with voltage jumping by + 60 V then -60V over short intervals (less than 30 seconds)". This work is very recent and is being analysed more completely, but already it clearly shows that the F&P calculation of assuming only DC input is incorrect and the wild fluctuations give a large AC contribution which has been ignored and instead interpreted as a contribution to excess heat. The overall conclusion is that the experimental technique employed by F&P is inadequate or as written in the CERN preprint "The experiment and some of the calculations have been described as "simple". This is incorrect - the process involving chaotic motion, is complex and many calibrations and corrections are needed. The calculations have been made to appear simple by incorrectly ignoring important factors. It would have been better to describe the experiments as "poor" rather than "simple". The Fourth Annual Cold Fusion Conference,(ICCF-4) last four days, 6 to 9 December. It is difficult to detect from the titles and speakers' names, any hint of skepticism that is so essential in Science, except possibly my talk and the final Panel Discusion where the names of the members of the Panel have not yet been given - wonder who will be invited to provide some balance to reflect the fact that the vast majority of the World's scientists do not believe in Cold Fusion - will I be invited? My talk is entitled "Review of Progress in Cold Fusion" and I had rather hoped that it would be in one of the scientific sessions. If there had been lots of progress to report, I would have been given lots of time, if no progress then I would have been given zero time. I have been given 20 minutes. The talk is in the Parallel Session on "Special Topics". The speaker before is Dr. Fox and the following speaker is Dr. Mallove (no doubt purely accidental choices) - Drs. Fox and Mallove are not noted as recent regular scientific research workers, but they may surprise us. It could be an interesting session and one looks forward to later talks on "Cheap Electrical Power from Nuclear Fusion" and "Proposed Nuclear Physics Experiment to Conclusively Demonstrate and Explain Cold Fusion". Cold Fusion workers may be interested in the last three paragraphs of an article that Nature asked me to write on "The Rise and Fall of the 17 keV Neutrino" where a comparison is made with Cold Fusion - it is the 4th November issue, 366(1993)29-32. (c) Douglas R.O. Morrison. Newsgroups: sci.physics.fusion Path: netcom.com!netcomsv!decwrl!pa.dec.com!src.dec.com!crl.dec.com!crl.dec.com!caen!math.ohio-state.edu!cs.utexas.edu!uunet!tandem!zorch!fusion From: 76570.2270@compuserve.com (Eugene Mallove) Subject: ICCF4 Maui Conference Papers Message-ID: <931203223050_76570.2270_BHA89-1@CompuServe.COM> Sender: scott@zorch.sf-bay.org Reply-To: 76570.2270@compuserve.com (Eugene Mallove) Organization: Sci.physics.fusion/Mail Gateway Date: Sat, 4 Dec 1993 01:14:09 GMT Lines: 616 Papers Scheduled for the Fourth International Conference on Cold Fusion (ICCF4) December 6-9, 1993 Lahaina, Hawaii Sponsor: Electric Power Research Institute (EPRI) Calorimetery - Presentations Calorimetry of the Pd-D2 System: the Search for Simplicity and Accuracy Fleischmann, Pons, Le Floux, Roulette Excess Heat and Nuclear Product Measurments Gozzi, Bakducci, Caputo, Cignini, Gigii, Tomellini, Frullani, Cibani, Garibaldi, Jodice,Urciucii Observation of Excess Heat During Electrolysis of 1M LiOD in a Fuel Cel l Type Closed Cell Hasegawa, Hayakawa, Yamamoto, Kunimatsu Deuterium Charging in Palladium by the Electroysis of Heavy Water: Production of Heat Excess Bertalot, DeMarco, DeNinno, LaBarbara, Scaramuzzi, Violante Calorimetric Studies of the D/Pd System McKubre, Bush, Crouch-Baker, Hauser, Jevlic, Passel, Smedley, Tanzella, Williams, Wing Triggering and Structural Changes in Cold Fusion Electrodes Bockris, Sundaresan, Letts, Minevski Search for Nuclear Products of Cold Fusion Miyamaru, Chimi, Inckuchi, Takahashi A Remarkable Excess Heat Generated Using a New Type Pd Cathode Arata, Zhang Excess Heat Generation, the Over Voltage Deviation and the Neutron Emission in D2O-LiOD-Pd Systems Okamoto, Yoshinaga, Kusunoki Some Characteristics of Heat Production Using the "Cold Fusion" Effect Storms Heat Measurement of Water Electrolysis Using Pd Cathode and the Electrochemistry Ota, Yoshitake, Yamazaki, Kuraisuka, Yamaki, Andolida, Kamiya Reproducible Anomalous Heat Production and "Cold Fusion" in Au)/Pd/PdO Heterostructure Electrochemically Saturated by Hydrogen (or Deuterium) Lipson, Lyakhov, Derjaguin Heat and Helium Measurements in Deuterated Palladium Miles, Bush Calorimetry of D2O Electrolysis Using a Palladium Cathode in a Closed Cell System: AC Current Electrolysis Method Oyama, Hirasawa, Tadsuma, Yamamoto Subtraction of a New Thermochemical Effect from the Excess Heat, and the Emerging Avenues in Cold Fusion Handel Heat After Death Pons, Fleischmann Heat Production with Multilayer Thin-Film Electrodes Miley, Batyrbakov, Patel, Hora, Tompkins Back to the Future: The Fleischmann-Pons Effect in 1994 Melich, Hansen Pd/D Calorimetry - The Key to the F/P Effect and a Challenge to Science Hansen, Melich Calorimetric Measurements of the Electrolysis of Heavy Water at Palladium Cathodes Zhang, Sun, Wang, Yan, Tan Excess-Heat, Heat Production Equation Waisman, Kertamus Calorimetric Studies for Several Light Water Electrolytic Cells with Potassium Carbonate and Sodium Carbonate Electrolytes and Nickel Cathodes Bush, Eagleton Anomalous Heat Evolution from SrCeO3-Type Proton Conductors During Absorption/Desorption of Deuterium in Alternate Electric Field Mizuno, Enyo, Akimoto, Azumi Further Studies on Excess Heat Generation in Ni-H2O Electrolytic Cells Ramamurthy, Srinivasan, Mukherjee, Babu Cavitation Induced Micro-Fusion Stringham A Method to Improve Algorithms Used to Detect Steady State Excess Enthalpy Swartz The Excess Heat Experiments on Cold Fusion in Titanium Lattice Zhang, Gou, Zhu, Lou, Liu, Miao, Ye, Cheng Factors Effecting the Success Rate of Heat Generation in CF Cells Cravens Calorimetry - Posters Some Lessons from Optical Examination of the PFC Phase-II Calorimetric Curves Swartz Triggering Exothermic/Endothermic Effects in Deuterated Palladium Letts Erzion-Nuclear Transmutation Experiments by Electrolysis of Heavy and Light Water Bazhutov, Skuratnik, Khokhlov, Chertov Apparatus for Safely Extending Cold Fusion Investigations to High Temperature, Pressure, and Input Power Regimes Ransford, Piloe Linear, High Precision, Redundant Calorimeter Barrowes, Bergeson A Home Cold Fusion Experiment -- Is it Real, or Is It the CF Hex? Hugo Investigation on the Excess Heat in D/Pd SYstem Using Pressurized Electrochemical Cell Mo, Lu, Zhou, Li Search for Excess Heat and Trial to Reproduce the Anomalous Neutron Emission from Palladium-Deuterium Electrolysis Cells Isagawa, Kanda, Suzuid Study of Concentrations of Helium and Tritium in Electrolytic Cells with Excess Heat Generations Aoki, Kurata, Ebihara, Yoshikawa Nuclear - Presentations To be Annnounced Wolf Calorimetric and Nuclear Products Measurements at Glow Discharge in Deuterium Kucherov, Karabut, Savvatimova Helium-4 Quantatitive Measurements in the Gas Phase of Cold Fusion Electrochemical Cells Gozzi, Balducci, Caputo, Cignini, Gigli, Tomelini, Frullani, Cisbani, Garibaldi, Jodice, Urciucii Tritium Evolution from Various Morphologies of Palladium Tuggle, Claytor, Taylor Heavy Water Electrolysis Will, Cedzynska, Linton Cold Fusion by Sparking in Hydrogen Isotopes: Energy Balances and Search for Fusion By-Products Dufour, Foos, Millot Alkali-Hydrogen Cold Fusion Accomplished with Tritium Production on Nickel Notoya Strontium Production in Two Electrolytic Cells with Light Water Based Rubidium Carbonate Electrolytes and Nickel Mesh Cathodes Bush, Eagleton Detection of Iron Atoms on Gold Electrodes Used in Electrolysis of H2O and D2O in Neutral and Alkaline Media Ohmori, Enyo Investigation of Low Level Tritium Generation in Ni-H2O Electrolytic Cells Sankaranarayanan, Srinivasan, Bajpai, Gupta Generation of Cold Fusion Products in Deuterated High Tc Superconductors Upon the Phase Transition to Superconducting State Lipson, Sakov, Derjaguin Deuterium Absorbability and Anomalous Nuclear Effect of YBCO High Temperature Superconductor Jin, Zhan, Liu Neutron Gerneation in the Solid Protonic Conductors with Perovskite-Type Structure Samgin, Baraboshikin, Andreev, Murigin, Gorelov, Vakarin, Tsvetkov, Shalyapin, Golikov, Fomina Particle Acceleration and Neutron Emission in a Fracture Process of a Piezoelectric Material Shirakawa, Fujii, Chiba, Sueld, Ikebe, Yamaoka, Miura, Watanabe, Hirose, Nakahara, Utsumi The Analysis of the Neutron Emission from the Glow Discharge in Deuterium Gas Tube Chi, Ma, Chen, Huang, Yu, Mo, Li Experimental Testing of the Erzion Model by Reacting of Electron Flux on the Target Bazhutov, Koretsidy, Kuznetsov, Baranov, Skurainic, Khokhiov, Sukovatkin A Study on Anomalous Nuclear Fusion Reaction by Using HV Pulse Discharge He Cold Fusion Experiments by Using Electrical Discharge in Water Matsumoto The Cubic-Tetragonal Phase Transition in Titanium Deuteride and Its Possible Relation to "Cold Fusion Reactions" Fernandez, Cuevas, Alguero, Sanchez Observation of Anomalous Nuclear Effects in D2-Pd System Iwarmura, Itoh, Toyoda Deuteron Fusion Experiment with Ti and Pd Foils Implanted with Deeuteron Beams II Iida, Fukuhara, Sunarno, Miyamaru, Takahashi Behavior of Key Elements in Palladium for the Solid State Nuclear Phenomena Occurring in Heavy Water Electrolysis Okamoto, Yoshinaga, Kusunchi Piezonuclear Fusion Studies at BYU Jones Impurities in Cathode Material Before and After Deuterium Glow Discharge Experiments Savvatimova, Kucherov, Karabut Detection of Neutrons from Deuterided Palladium Subject to High Electrical Currents Taylor, Claytor, Jones Characteristic Peak Structures on Charged Particle Spectra During Electrolysis Experiment Taniguchi Observations of Cold Fusion Neutrons from Condensed Matter Sakamoto Results and Perspectives of the TOFUS Experiment in Neutron Emission from D2/Metal Systems Agnello, Botta, Bressani, Calvo, Fanara, Feliciello, Iazzi Anomalous Protons and a-particles Emitted in 150-keV Deuteron Bombardment on Highly Deuterated Ti Kasagi, Ohtsuki, Ishai, Hiraga Nuclear - Posters Oldo Isotope Anomalies and Cold Fusion Collis The Influence of Conductivity on the Neutron Generation Process in Proton Conducting Solid Electrolytes Samgin, Baraboshkin, murigin, Tsvetkov, Andreev, Vakarin Initiating of the Erzion - Nuclear Transmutation in Gas by Thermocycling Bazhutov, Skuratnik, Khokhlov, Chertov Investigation of the Erzion - Nuclear Transmutation by Ion Beams Bazhutov, Korefskiy, Baranov, Plats, Pohil, Sakharov Measurement of D-D Fusion in TiD Target Under Irradition of Heavy Ion Teshigawara, Konashi, Yamamoto, Kayano, Aratono, Furukawa, Tachikawa An Approach to the Probable Mechanism of the Non-Radioactive Biological Cold Fusion or So-Called Kervran Effect (Part 2) Komaki Observation of Neutrons and Tritium in KD2PO4 Single Crystals Upon the Fermoelectric Phase Transition Lipson, Sakov, Kalinin, Saunin, Derjaguin Concept of Target Material Choice for Nuclear Reactions in Condensed Media Romodanov, Savin, Skurainik, Korneev A New Device for Measuring Neutron Burst in Cold Fusion Experiment Xiaozhong, Rongbao, Peijia, Wenliang, Hengjun, Feng, Guoan, Jagun,Zhonglin Observation of High Energy (~1 MeV) Charge Particles During Implantation of 5 KeV Protons on Pd and Ti Foils Using CR-39 SSNTD's Chindarkar, Paithankar, Bhagwai, Naik, Iyyengar, Srinivasan New Experiment Results of Anomalous Nuclear Effect in Deuterium/Metal Systems Chin, Yin-Wen, Xin-Wei, Jun, Wu-Shou, Hong-Ching, Ze, Quan-Ren, Zu-Ying, Bu-Jia, Yong-Hui, Xiao-Zhong, Yi Heat Release and Product Yield of Nuclear Reactions in Pd-D System Kucherov, Karabut, Savvatimova On the Subsistence of Anomalous Nuclear Effects after Interrupting the Electrolysis in F-P type Experiments with Deuterated Ti Cathodes Alguero, Fernandez, Cuevas, Sanchez Theory - Presentations Neutron Transfer Reactions and Lattice-Induced Nuclear Decay Hagelstein Cold Fusion '93: Some Theoretical Ideas Preparata Deuteron-Induced Fusion in Various Environments Hale, Talley Nuclear Fusion in Condensed Materials Ichimaru Opposition and Support for Cold Fusion Rabinowitz The 3-Dimensional Resonance Tunneling in Chemically Assisted Nuclear Fission and Fusion Reactions Li Coulomb Barrier Transmission Resonance Transparency for Cold Fusion with Deuterium and Hydrogen Kim, Yoon, Zubarev, Rabinowitz Comments on Exotic Chemistry Models and Deep Dirac States for Cold Fusion Rice, Kim, Rabinowitz Nuclear Reaction Under Ambient Conditions Chuan-Zan, Yi-Fang A Phenomenological Model of the Cold Fusion in Pd (Ti)-D System Vysotskii, Kuzmin New Hydrogen (Deuterium) Bohr Orbits in Quantum Chemistry and "Cold Fusion" Processes Vigier Interchange of Thermonuclear and Cold Fusion Yi-Fang, Chuan-Zan A Model of Cold Nuclear Transmutation by the Erzion Catalysis (the Erzion Model of "Cold Fusion" Bazhutov, Vereshkov Delocalization of Virtual Neutrons Hagelstein, Kaushik D-Pd System Nuclear Reactions and Fission under Ambient Conditions Chuan-Zan, Yi-Fang, Hui-Lan Symmetry Breaking and Hydrogen Energy in PdDx Johnson The Role of Hydrogen Ion Band States in Cold Fusion Chubb, Chubb Boson Condensation in the Solid State Within a Sea of Fermions as a Model for Cold Fusion Waber, Llano Some Considerations in Multibody-Fusion in Metal Deuterides Takahashi Embedded Atom Models for Pd and Applications Chaudhary, Kaushik, Johnson, Hagelstein Cold Fusion and New Physics {1} Yang, Chaen, Tang The Nature and Consequences of the Electron Capture Model for Rationalizing Excess Energy Production in Cold Fusion Andermann Sonoluminescence, Cold Fusion, and Blue Water Lasers Prevenslik The Role of Polyneutrons in Cold Fusion Reactions Fisher A Unifying Model for Cold Fusion Bush Wave of Deuterons and Cold Fusion Yabuuchi Deuteron Interaction in Unitary Quantum Theory Sapogin Mechanism of Cold Nuclear Fusion II Tsuchiya Theory - Posters A Mechanistic Model of Cold Fusion Based on Hot Spot Hypothesis Sioda Conditions and Mechanism of Nonbarrier Double-Particle Fusion in Potential Pit in Crystal Vysotskli Coherent Nuclear Reactions in Crystalline Solids Valdya Catastrophic Active Medium (CAM) Theory of Cold Fusion Swartz On Bose-Einstein Condensation of Deuterons in PdD Vaidya An Alternate Model of the Atomic Nucleus Ragland One Can Account for Cold Fusion by Two Concepts: Screening by Electrons and Harmonic Oscillator Resonance Rambaut Possible Exhibition of the Erzion-Nuclear Transmutation in Astrophysics Bazhutov Isotropic and Chemical Compositions Changes in Cold Fusion Experiments in the Erzion Model Bazhutov, Kuznetsov Burning Away of Radioactive Isotopes and Production of Some Stable Isotopes in the Erzion Model Bazhutov, Koretskiy, Kuznetsov The Possible Ways of Cold Nuclear Transmutation Optimization in the Context of the Erzion Model Bazhutov, Koretskiy, Minakov, Cheltsov, Chertov On the Mechanism of Cold Fusion Sapagin Synergetic Activation Model: Key to Intense and Reproducible Cold Fusion Filimanov Cold Fusion Explained by Negentropy Theory of Microdrop of Heavy Water Takahashi Ferroelectrics for Cold Fusion Fedorovich Dee's 1934 D-D Fusion Experiment and Possible Evidence for Cold Fusion Kim Materials - Presentations Physical and Metallurgical Aspects of the Entry of Hydrogen into Metals Oriani Alfred Cohen and After: the alpha, beta, gamma of the Pd-H System Fleischmann, Larramona, Pons, Preparata, Sugiura Helium/Hydrogen Behavior in Palladium Li Electrolytic Hydrogen/Deuterium Absorption into Pd, Pd-Rh and Pd-Ag Alloys in Fuel Cell Type Closed Cell Akita, Tsuchida, Nakata, Kubota, Kobayahi, Yamamoto, Hasegawa, Hayakawra, Kunimatsu High Power Pulsed Electrolysis for Large Deuterium Loading on Pd Plates Celani, Spallone, Tripodi, Nuvodi, Petrocchi, Di Gioacchin, Boutet Surface Morphology and Microcomposition of Palladium Cathodes after Electrolysis in Acidified Light and Heavy Water Dash, Noble Some Materials Aspects of the Electrochemical Insertion of Hydrogen and Deuterium in Metals Huggins Measurements of Hydrogen Loading Ratio of Pd Anodes Polarized in LiH-LiCl-KCl Molten Salt Systems Okamoto, Nazu Movement of Li during Electrolysis of 0.1M-LiOD/D2O Solution Miyamoto, Sueki, Fujii, Shirakawa, Chiba, Kobayashi, Yanokura, Aratani, Nakahara Deuterium Changing in Palladium by the Electrolysis of Heavy Water: Measurement of the Cell Parameter Cilloco, Felici, Bertalot, DeMarco, DenInno, Lebarbera, Scaramuzzi, Violante Sonofusion: Maximum Temperature Hot Spots Fukushima, Yamamoto Charging Hydrogen into Ni in Hydride-Containing Molten Salts Liaw, Liebert, Ding Measurements of Hydrogen Loading Ratio of Pd Electrodes Cathodically Polarized in Aqueous Solutions Sano, Nezu Evidence of Agglomeration and Syneresis in Regular and Excess Heat Cells in H2O Criddle Absorption of Hydrogen into Palladium Hydrogen Electrode-Effect of Thiourea Tsuchida, Akita, Nakata, Kunimatsu The Measurments and the Control of the Loading Ratio of Deuterium in Palladium Shao, Huang, Mo, Yu, Yao, Li Relativistic Band Structure Calculation of Palladium Hydride Waber, Perger, Schletizer Materials - Posters Isotopic Fuel Loading and Other Reactions Within an Electrode Swartz Localized Melting and Microcomposition of a Pd Cathode After Electrolysis in Acidified Heavy Water Dash, Diman Electrolytic Deuterium Absorption by Pd-Rh Alloy Cathodes in Fuel-Cell Type Closed Cell Hayakawa, Hasegawa, Yamamoto, Kunimatsu Some Thermodynamic Aspects Related to Charging Hydrogen Species into Metal Lattice Liaw Electrolytic Deuterium Absorption by Pd Cathodes with Sputtered Gold Film Kubota, Kato, Kunimatsu Anomalous Surface Morphology and Composition of Electrolyzed PdD Cathodes Forsley Special Topics - Presentations Cold Nuclear Fusion & Enhanced Energy Devices: A Progress Report Fox Review of Progress in Cold Fusion Morrison Cold Fusion: The High Frontier Implications for Space Technology Mallove New Pulse Gas Loading Cold Fusion Technology Chukanov Cheap Electric Power from Nuclear Fusion? Comog Proposed Nuclear Physics Experiment to Conclusively Demonstrate and Explain Cold Fusion Bass Cold Fusion and Nuclear Proliferation Guokas Ecological Aspects of Thermal Systems Using Hydrogen Isotopes Romodanov, Savin, Skuratnik, Korneev, Giagolev Xref: netcom.com misc.legal:67445 misc.legal.computing:4799 misc.answers:307 news.answers:15407 Path: netcom.com!netcomsv!amd!amdahl!pacbell.com!ames!sgiblab!darwin.sura.net!mojo.eng.umd.edu!bloom-beacon.mit.edu!pad-thai.aktis.com!pad-thai.aktis.com!not-for-mail From: Erik J. Heels Newsgroups: misc.legal,misc.legal.computing,misc.answers,news.answers Subject: Law Related Resources on the Internet and Elsewhere (1 of 2) Followup-To: poster Date: 3 Dec 1993 00:00:43 -0500 Organization: University of Maine School of Law Lines: 2404 Sender: faqserv@security.ov.com Approved: news-answers-request@mit.edu Expires: 7 Jan 1994 05:00:12 GMT Message-ID: Reply-To: Erik J. Heels NNTP-Posting-Host: pad-thai.aktis.com X-Last-Updated: 1993/12/02 Archive-name: law-net-resources/part1 Version: 2.1 Last-modifed: 93/11/17 (This document has been brought to you in part by CRAM. See the bottom for more information, including instructions on how to obtain updates.) === "The Legal List, Law-Related Resources on the Internet and Elsewhere" by Erik J. Heels, 39 Main St., Eliot, ME 03903 *** Note new e-mail address: legal-list@justice.eliot.me.us ------------------------------- cut here --------------------------- 17 Nov 93 README file for "The Legal List, Law-related Resources on the Internet and Elsewhere" by Erik J. Heels, Version 2.1, 17 Nov 93, Copyright (c) 1993 Erik J. Heels. With support from The University of Maine School of Law, The Maine Law and Technology Association, and Midnight Networks Inc. "The Legal List" is available via anonymous FTP from ftp.midnight.com (137.103.210.2) (Midnight Networks Inc.) as pub/LegalList/legallist.txt. This means that you may connect to ftp.midnight.com by anonymous FTP ONLY. Please DO NOT TELNET to ftp.midnight.com. If you do not know how to FTP the file, ask someone for help. See Section 3.1, FTP VIA E-MAIL, if you have e- mail access but you do not have FTP access. If you have problems with FTPing to ftp.midnight.com, send a message to admin@midnight.com or legal-list@justice.eliot.me.us. The purpose of "The Legal List" is to provide a consolidated list of all of law-related resources available on the Internet and beyond. legal-list@justice.eliot.me.us - Questions, additions, corrections. legal-list-request@justice.eliot.me.us - Include "subscribe your-name" in the subject of the message to subscribe to a periodic distribution list. Include "unsubscribe" in the subject to unsubscribe. by Erik J. Heels 39 Main St. Eliot, ME 03903 ------------------------------- end ------------------------------- -Updated: 1993/12/02 Archive-name: law-net-resources/part1 Version: 2.1 Last-modifed: 93/11/17 (This document has been brought to you in part by CRAM. See the bottom for more information, including instructions on how to obtain updates.) === "The Legal List, Law-Related Resources on the Internet and Elsewhere" by Erik J. Heels, 39 Main St., Eliot, ME 03903 *** Note new e-mail address: legal-list@justice.eliot.me.us ------------------------------- cut here --------------------------- 17 Nov 93 README file for "The Legal List, Law-related Resources on the Internet and Elsewhere" by Erik J. Heels, Version 2.1, 17 Nov 93, Copyright (c) 1993 Erik J. Heels. With support from The University of Maine School of Law, The Maine Law and Technology Association, and Midnight Networks Inc. "The Legal List" is available via anonymous FTP from ftp.midnight.com (137.103.210.2) (Midnight Networks Inc.) as pub/LegalList/legallist.txt. This means that you may connect to ftp.midnight.com by anonymous FTP ONLY. Please DO NOT TELNET to ftp.midnight.com. If you do not know how to FTP the file, ask someone for help. See Section 3.1, FTP VIA E-MAIL, if you have e- mail access but you do not have FTP access. If you have problems with FTPing to ftp.midnight.com, send a message to admin@midnight.com or legal-list@justice.eliot.me.us. The purpose of "The Legal List" is to provide a consolidated list of all of law-related resources available on the Internet and beyond. legal-list@justice.eliot.me.us - Questions, additions, corrections. legal-list-request@justice.eliot.me.us - Include "subscribe your-name" in the subject of the message to subscribe to a periodic distribution list. Include "unsubscribe" in the subject to unsubscribe. by Erik J. Heels 39 Main St. Eliot, ME 03903 ------------------------------- end -------------------------------