This is the exhaust system, made of mandrel bent aluminzed tubing by Tom Smith in Hartford, CT. I had the downpipe modified slightly, I made the vertical part shorter, and I took out the funny S bend at the end and put in straight pipe. I guess whatever 240T he made the pipe on was a little different than mine.

The Magnaflow Super Turbo muffler, Summit part #WLK-17749 2.5" offset in/out. It's just about the biggest muffler you can fit in there, I picked it for max sound control. At idle and part throttle, it's pretty much like stock. At WOT, it's a bit louder than stock. The turbo spool-up is much quicker, and the pressure just shoots from 2 to 13 psi.

Smooth reduction from the 3" Catco cat to the 2.5" back half.

---

Back