|
Integrating Old and New Hardware and Software
General Statements:
General:
8/15/96 Unitary Controller Default
setpoints.
8/15/96 Triac output will not
energize a relay.
8/27/96 U.L. Listings as of 8/27/96
8/15/96 Lightning Arrestors for
Vulnerable Com. Lines.
NOTE: THE REMAINING CATEGORIES IN THIS SECTION
ARE
ALPHABETIZED
AirMaster:
8/3/98 AirMaster Schedules
EP-1010:
8/15/96 Master/Slave system displays “Slave-Net
Failure” alarms.
ETC’s:
10/28/96 Programming the ETC-3.
ETM’s:
8/15/96 “Heat Pump” ETM’s and
Controllers
6/25/97 Resetting Unitary Controller
Run Times
8/15/96 ETM Damper Control and Sensor Failure Modes.
IOM:
8/15/96 Lead/Lag PROM notes.
8/15/96 Adding remote override
feature to an existing IOM-1010
8/15/96 Problems with all 8 IOM inputs.
NOVAR-NET:
10/28/96 Access Code
Log on Novar-net systems.
8/20/96 Subject: Troubleshooting problems with
Novar-net.
4/03/97 Subject:
Novar-net Compatibility of new & old EP/2’s
PC/ESS:
8/15/96 Subject: Degree Day Log monthly totals.
8/20/96 Subject: Changing the clock in an EP/2, EP,
or EC.
8/20/96 Subject:
Freeing up memory in a PC.
PID Control:
10/29/96
Subject: Using Outside Air
Lockout with PID control.
6/25/97 Subject:
PM2 Processing Modem.
UVC’s:
8/15/96 Subject: UVC Airflow alarm.
8/15/96 Subject: Using the FTS-3 or FTS-3A without
timed override.
8/15/96 Subject: Max discharge air temp. reading of
a UVC.
1/23/96 Specifications/Installation Instructions for the
UVC/ETC Supply Air Temperature Sensor (RTS- UVC)
9/10/96 Subject: UVC Dirty Filter Alarm.
VAV-4020:
8/15/96 Subject: Damper Sequence of Operation for
the VAV-4020.
8/15/96 Subject: Inaccurate airflow readings.
|
